Integrated Stereo Amplifier TA-535

Sony Corporation; Tokyo

  • Year
  • 1980 ?
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 155700

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 120; 220; 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 80 W (undistorted)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Integrated Stereo Amplifier TA-535 - Sony Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 430 x 130 x 300 mm / 16.9 x 5.1 x 11.8 inch
  • Notes
  • A hi-fi stereo integrated amplifier with output power of 40 watts per channel into 4 or 8 ohms. With a 2 stage Power Level meter (0-16 watts, 0-160 watts), rotary controls for Bass, Treble, Volume, Balance, Reverb Level and Mic Mixing, push button switches for Functions (Aux, Tuner, Phono, Tape1, Tape2), Speaker A and B, Reverb, Low Filter, Loudness and Muting and jacks for Headphones, Mic, Rec Out 2 and Tape 2. On the back, RCA phono sockets for input Phono, Tuner, Aux, for input/output Tape 1, terminals for 2 pairs of loudspeakers (A, B) and 3 AC outlets.

    Specification  
    Continuous RMS Power Output
    both channels driven at 20Hz-20kHz
    40 + 40 W into 8Ω < 0.05% THD
    40 + 40 W into 4Ω 0.06% THD
    Power Bandwidth IHF 10Hz-40kHz (8Ω)
    Damping Factor 30 (8Ω, 1kHz)
    Frequency Response  
      PHONO
      TUNER, AUX, TAPE1, TAPE2
      MIC
    RIAA equalization curve ±0.3dB
    10Hz-50kHz +0dB,-3dB
    100Hz-10kHz +0dB,-3dB
    Inputs
     Sensitivity/Impedance
     
      PHONO
      TUNER, AUX, TAPE1, TAPE2
      MIC
    2.5mV/50kΩ
    150mV/50kΩ
    2mV/10kΩ
    Signal to Noise ratio
     (weighting network/input level)
     
      PHONO
      TUNER, AUX TAPE1, TAPE2
    80dB (A, 2.5mV)
    95dB (A, 150mV)
    Outputs  
      REC OUT 1,2 Voltage/Impedance 150mV/10kΩ
      HEADPHONES Low and high impedance headphones
      SPEAKERS 4-16Ω (AEP, E, UK model)
    8-16Ω (Canadian model)
    Harmonic Distortion Less than 0.05% at rated output (8Ω)
    Less than 0.06% at rated output (4Ω)
    Intermodulation Distortion Less than 0.05% at rated output
    Filter Low 6dB/oct below 30Hz

    Versions/Power Requirements

    Canadian model AC 120V 60Hz
    AEP AC 220V 50Hz
    SCN model AC 220V 50Hz
    UK model AC 240V 50Hz
    E model AC 120, 220 or 240V 50/60Hz with voltage selector

    Power Consumption:
    Canadian model         145W
    AEP, E, SCN models  275W
    UK model                  360W

    The Canadian model has a slighly larger case 430 x 135 x 300 mm (WHD).

    ntegrated Stereo-Amplifier; 2 Lautsprecherausgänge (A/B) schaltbar, Kopfhörerausgang über Klinkenbuchse 6,3 mm. Eingänge: Phono, Tuner, Aux, Tape 1, Tape 2 an der Frontseite über Klinkenbuchsen 6,3 mm; Mikrofon mixing, Reverb-regelbar. Wahlschalter: Mic, Source, Low-Filter, Loudness, Muting -20 dB; Anzeige der Ausgangsleistung über LED.

  • Net weight (2.2 lb = 1 kg)
  • 8.1 kg / 17 lb 13.5 oz (17.841 lb)
  • Mentioned in
  • -- Original prospect or advert (1980 Sony Hi-Fi catalogue)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Service manual TA-535 dated 1979)
  • Author
  • Model page created by Museum Roggenhofer. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Integrated Stereo Amplifier is part of the collections of the following members.

 Forum