- Pays
- Allemagne
- Fabricant / Marque
- Grundig (Radio-Vertrieb, RVF, Radiowerke)
- Année
- 1956
- Catégorie
- Radio - ou tuner d'après la guerre 1939-45
- Radiomuseum.org ID
- 82003
-
- alternative name: Grundig Portugal || Grundig USA / Lextronix
Cliquez sur la vignette du schéma pour le demander en tant que document gratuit.
- No. de tubes
- 9
- Principe général
- Super hétérodyne (en général)
- Circuits accordés
- 9 Circuits MA (AM) 13 Circuits MF (FM)
- Gammes d'ondes
- PO, GO, OC et FM
- Particularités
- Télécommande par HF ou fil
- Tension / type courant
- Alimentation Courant Alternatif (CA) / 110-220 Volt
- Haut-parleur
- 5 HP
- Matière
- Boitier en bois
- De Radiomuseum.org
- Modèle: 4055/56 - Grundig Radio-Vertrieb, RVF,
- Forme
- Modèle de table avec boutons poussoirs.
- Dimensions (LHP)
- 706 x 444 x 300 mm / 27.8 x 17.5 x 11.8 inch
- Remarques
-
2 Tasten für UKW, "Fern-Dirigent".
Drehbare Ferritantenne, Gegentakt-Endstufe.Siehe auch Vorgänger Grundig 4055W/3D (noch ohne Anschluss f. Fern-Dirigent) und 4055WF/3D.
Es existierte auch eine Ausührung 4055W/56/S für den Export nach Schweden.
- Poids net
- 17.6 kg / 38 lb 12.3 oz (38.767 lb)
- Schémathèque (1)
- -- Original-techn. papers.
- Auteur
- Modèle crée par Gottfried Silberhorn. Voir les propositions de modification pour les contributeurs supplémentaires.
- D'autres Modèles
-
Vous pourrez trouver sous ce lien 6201 modèles d'appareils, 5426 avec des images et 4200 avec des schémas.
Tous les appareils de Grundig (Radio-Vertrieb, RVF, Radiowerke)
Collections
Le modèle fait partie des collections des membres suivants.
Contributions du forum pour ce modèle: Grundig Radio-: 4055/56
Discussions: 1 | Publications: 2
I am repairing a Grundig 4055W/3D-56 and the MW/LW/SW is working fine, but only the FM is not working. I have replaced the 10 uF elco in the FM detector, but I hear nothing than a little bit noise (with the volume at maximum level). I exchanged the EABC80 and ECC85 and doesn't matter.
When I use a small transistor FM radio to test the local oscillator of the Grundig radio and I tune this at 100.7MHz and I tune the Grundig 4055 to 90 MHz I don't hear nothing on the transistorradio. Even when I turn the dialknob from the beginning to the end of the Grundig, I don' t hear a signal on my transistorradio.
The voltage on pin1 (anode of first triode) is 145 V, the voltage on pin 6 (anode of second triode) is about 132 V.
Does somebody know if there is a technical explanation of the FM tuner of this radio? What could be the reason that the oscillator is not working.
I use the output of the FM tuner of my Telefunken Opus 7 radio and connect it to the first grid of the Ech81 tube of the 4055 radio. Now I have a good sound, so the mf amplifiers and FM detector works fine and the problem is in the FM tuner of the 4055.
Martin Panhuis, 04.Dec.13