radiomuseum.org

Collection de lampes / semi-conducteurs de Joe Sousa, Etats-Unis

Information - Aide
ID = 4942
Photo Joe Sousa

Vous trouverez ci-dessous une partie de la collection de Joe Sousa.

I am interested in very clever radio designs, like the reflex 3 tube radios by Grundig in the late 50's and early 60's, or their single pentode FM multiplex decoders. I also have a broad interest in old industrial electronics, more specifically, in tube opamps. My interest in tubes tends to focus toward the end of the tube era, when the some of the most interesting designs were done. I also have a strong interest in designing with glow tubes. Most of all, I want to share and learn!
Résultats: 1 à 15 de 15
  
  
  
 
Ordre de tri:  [ Nom | Fabricant | Année | Type | Pays ]

Extrait de la collection de lampes / semi-conducteurs de Joe Sousa. Ces images ont été chargées sur la page d'une lampe / semi-conducteur par Joe Sousa.

Cliquer pour aller à la page du composant
CK510AX
Raytheon Mfg. Co.; Cambridge... USA
Paper label version, pinout printed on label.
CK511X
Raytheon Mfg. Co.; Cambridge... USA
Glass envelope length is 17mm. Prototype filamentary thyratron. Not mercury filled. Purple glow indicates He and/or Ar.
SN-856-F
Sylvania (Hygrade, GTE, Nilc... USA
Neon tube for signal strength indication. The tube is usually wired like a regulator gas tube regulating the plate voltage of the IF and/or RF stages. The variation in IF/RF plate current caused by a change in AGC grid bias voltage at the IF/RF stages. This tube was used the FADA radio model RW.
Tune-A-Lite
Cliquer pour aller à la page du composant
ТГ5Р
Cliquer pour aller à la page du composant
Xtube-98
This filamentary triode does not have a conventional grid structure. Like other Russian made rod pentodes, all the elements are rod structures.
zzz_trash1
Cliquer pour aller à la page du composant
0AX7
Cliquer pour aller à la page du composant
1С1А
This filamentary triode does not have a conventional grid structure. Like other Russian made rod pentodes, all the elements are rod structures.
1С38А
Cliquer pour aller à la page du composant
1Ж25Р
The 1j37b was usually shipped from the factory individually wrapped in paper with a blue stamp indicating it's type.
1Ж37Б
Common type USSR (SU) tube/s... SU
1j42a was shipped from the factory rolled up in pairs in very thin paper.
1Ж42А
Common type USSR (SU) tube/s... SU
Cliquer pour aller à la page du composant
6HV5
Filamentary pentode with conventional control grid, but other elements are rods.
06П1А
Résultats: 1 à 15 de 15
  
  
  
 

Page de collectionneur de Joe Sousa comme «Page personnelle sur RMorg»
En tant que membre de Radiomuseum.org, Joe Sousa expose les pièces de sa collection.

Joe Sousa a commencé ici sa collection le 10.Feb.2009. [noindex-fr]

  
Mentions légales Plus d'informations