| Descripción |
The original 6X6 was released by Rogers, Canada, on April 1, 1937, which is simply an octal version of the 6S5 . As usual, it has a single cathode for both the input triode and the CRT section.
In June 1937 Rogers registered a revision to the 6X6 design. This new 6X6 version was equipped with independent cathodes for both the triode and the CRT section. The triode cathode remained at pin 8, while the CRT cathode was assigned to pin 6, which was previously omitted.
Biassing the CRT cathode at a higher voltage (≥ 45V), while keeping the triode cathode grounded, increased the deflection of the shadow angle from 60° to 120°, which increased the utility of this eye tube considerably.
Apparently the production of the two-cathode 6X6 version was stopped after several years. Afterwards only the 6X6(G) single cathode version was available as replacement type.
British companies were at a great advantage to deliver single cathode 6X6 replacements, as there was already a number of equivalent magic eye tubes on the British market, like the Y63 , W1527, NR69, TI64, Vi103, CV1103 or 10E/305. They only needed to rename one of these tube types, and voila, the 6X6 replacement was there.
Texto en otros idiomas
puede diferir
|
