Antique radios, Old Time Radios
C30SB1
Country:
France
|
|
Identical to |
C30SB1
|
Similar
Tubes |
Normally replaceable-slightly different:
C30SV1
; C30SV2
; C30SW1
|
First Source
(s) |
1943 : -- Schematic France Electro Radio Oscilloscop
|
Base |
Octal (Int.Octal, IO) K8A, USA 1935
|
Filament |
Vf 6.3 Volts / If 0.6 Ampere / Half indirect / Specified voltage AC/DC |
Description |
Schirmdurchmesser: 30mm, B1: blau leuchtend. VA1=80V, VA2=400V, Vw zu justieren <0V, Vw cutoff = -85 V max. RW=1.5 Mohms max., WE Bildschirm = 5 mW/cm² max. Empfindlichkeit : Obere = 0.09 mm/Vdc, Untere = 0.13 mm/Vdc
|
Dimensions (WHD) incl. pins / tip |
35 x 135 x mm / 1.38 x 5.31 x inch |
Weight |
70 g / 2.47 oz |
C30SB1: Datasheets Mazda
Jean Marchal
|
C30SB1: Datasheets Mazda
Jean Marchal
|
Just Qvigstad
|
C30SB1: Datasheets Mazda
Jean Marchal
More ...
|
Quantity of Models at Radiomuseum.org with this tube (valve, valves, valvola, valvole, válvula, lampe):1
Collection of
|
|
|
|
Forum contributions about this tube
C30SB1
Threads: 1 | Posts: 1
Hits: 2158 Replies: 0
C30SB1 (C30SB1)
|
Jean Marchal
24.Nov.10
|
1
Bonjour,
Je voudrais rectifier les dimensions du tube :
Longueur = 135 mm max, Diamètre = 35 mm, Poids = 70g.
Et ajouter les caractéristique du tube :
VA1=80V, VA2=400V, Vw à ajuster <0V, Vw cutoff = -85 V max.
RW=1.5 Mohms max., WE écran = 5 mW/cm² max.
Sensibilité : supérieur = 0.09 mm/Vdc, inférieure = 0.13 mm/Vdc
Culot : Octal
Bibliographie : Datasheet Mazda du tube C30S.
Amicalement,
Jean
|
C30SB1
End of forum contributions about this tube
You reach this tube or valve page from a search
after clicking the "tubes" tab or by clicking a tube
on a radio model page. You will find thousands
of tubes or valves with interesting links. You
even can look up radio models with a certain tube
line up.
[rmxtube-en]
Data Compliance |
More Information |
|
|