radiomuseum.org
Please click your language flag. Bitte Sprachflagge klicken.

CV79_prototype-12seg

Information - Help 
ID = 77939
       
 
   
Tube type:  CW-magnetron 
  Ca. 1925 up to 1945 no serial production. For instance only development samples. *****
Identical to CV79_prototype-12seg
Similar Tubes
Other characteristic (electr. data):
  CV79_prototype-8seg
Successor Tubes CV79   CV89  

Base Octal (Int.Octal, IO) K8A, USA 1935
Filament Indirect
Description

At GEC E.C. Megaw experimented with magnetron oscillators since the early thirties. The split-anode structure had evolved to four-segment thanks to Yagi in 1928. The four-segment magnetron was investigated by Megaw, Posthumous, Runge et al in the very early thirties. It was observed that more stable operation at low magnetic fields could be achieved by increasing the number of segment pairs. As result, many types of multi-segment magnetron were introduced mainly in Germany, often referred to as interdigital or 'squirrel cage' type.

Megaw experiments with interdigital types led to the introduction of CV79 and of its frequency variant CV89.

Here one of the twelve-segment experimental samples made by Megaw. Likely the losses due to the bakelite octal base led to the decision of using all-glass lock-in bases in the production types.

Give also a look at the GEC eight-segment experimental prototype.

 


Just Qvigstad

Collection of

 
p7130018.jpg

CV79_prototype-12seg
 

You reach this tube or valve page from a search after clicking the "tubes" tab or by clicking a tube on a radio model page. You will find thousands of tubes or valves with interesting links. You even can look up radio models with a certain tube line up. [rmxtube-en]
  

Data Compliance More Information