radiomuseum.org

DET20

Informazioni - Aiuto 
ID = 17718
       
Stato:
Gran Bretagna (Regno Unito)
Produttore: MO Valve Co. Ltd.; GB
Progettista: MO Valve Co. Ltd.; GB 
Tipo:  Triodo a vuoto   VHF 
Identico a DET20
Valvole simili
Sostituita normalmente - piccola diff.:
  CV6

Zoccolo Octal (Int.Octal, IO) K8A, USA 1935
Utilizzata per Transmittertube (Radio)
Filamento Vf 6.3 Volt / If 0.17 Ampere / Indirect / Specified voltage AC/DC
Descrizione

Horned triode with separate anode and grid top caps.
Meets the CV6 specification with a slightly lower heater current.
Classified as a transmitter tube (DET = Dull Emitter Transmitter), it was also used as a local oscillator.

 
Bibliografia Babani, International Radio Tube Encyclopaedia   p. 198 & 199
-- Original-techn. papers.   
The Saga of Marconi Osram Valve
Taschenbuch zum Röhren-Codex 1948/49

det20_sockel.png DET20: Beier 2, 1957
Anonimo 384 Collezionista

Segue ...

Just Qvigstad
det20.png
DET20: GEC's catalogue supplement
Anonimo 413 Collezionista


Collezione di

Collezione di un iscritto da D
 
det20_uhftriode.jpg

DET20
 

Discussioni nel forum su questo valvole
DET20
Argomenti: 1 | Articoli: 2
Visite: 2261     Risposte: 1
DET20 (DET20) UHF-Sende-Triode
Dietmar Rudolph † 6.1.22
07.Aug.08
  1 Daten gemäß Beier 2, 1957:
Uf = 6,3V If = 0,17A (bei Beier ist ein Druckfehler: Uf = 0,3 V; Das kann nicht stimmen, da der Kaltwiderstand des Heizfadens ca. 18 Ω beträgt.)
Ua = 300V, Ia = 25 mA, S = 3mS, Ra = 8,3 kΩ, Na =3,5W, ce = 1pF, ca = 1pF, cg/a = 2,1 pF

DR
Roy Johnson
07.Aug.08
  2

6.3V at 0.17A is correct. 

The CV6 specification is for 0.2A (or less) and the DET20 meets this specification.  The equivalence has been changed to "normally replaceable".

Thank you, regards,

Roy

 

 
DET20
Fine delle discussioni nel forum su questo valvole

[rmxtube-en]
  

Conformità dei dati Ulteriori informazioni