DM71
|
|
|||||||||||||||||||||||||||||||||||||||
Forum contributions about this tube
DM71
Threads: 1 | Posts: 2
|
Hits: 3615 Replies: 1
DM71 : Differences to Dm70
|
|
|
Michael Watterson
04.Dec.11 |
1
It may be that DM70 and DM71 are indentical tubes with just the end wires all cut same length on DM71, but DM70 has all wires cut short except four left full size. The data is identical. So see DM70 operation. You can certainly cut DM70 wires to fit a DM71 socket or use a cut-up turned-pin IC socket to wire a DM71 into a DM70 location. The DM71 wires are really too short to safely solder directly.
|
|
Emilio Ciardiello
04.Dec.11 |
2
Michael, yes, according to Ravalico and to other manuals, DM70 and DM71 just differ for the length of pins. DM70 had flying wires, to be soldered directly in the circuit, while DM71 was intended for use with a subminiature socket. Data are the same. Emilio |
DM71
End of forum contributions about this tube
End of forum contributions about this tube
You reach this tube or valve page from a search
after clicking the "tubes" tab or by clicking a tube
on a radio model page. You will find thousands
of tubes or valves with interesting links. You
even can look up radio models with a certain tube
line up.
[rmxtube-en]
| Data Compliance | More Information |