Antique radios, Old Time Radios
K1
|
Country:
Germany
|
|
| Identical to |
K1
|
| Similar
Tubes |
Normally replaceable-slightly different:
T1_TKD
Differences not known by us:
A_Siemens
|
|
Successor Tubes
|
K3
|
| Base |
Blade contact
|
| Filament |
Vf 2.2 Volts / If 0.52 Ampere / Direct / Battery = |
| Description |
Anode = 90 Volt. In serie with the filament is a “Iron in hydrogen current limitter” of 0.52 Amp and connected to a 6 Volt filament accumulator. This current limitter and the resistance of the filament (law of Ohm) will reduce the real filament voltage to about 2.2 Volt. See also K1-AEG.pdf.
The Siemens A tube looks very similar to the AEG K1 but has a rectangular grid and later a tightly stretched filament. They had a patent on it. Benefit was an even emission across the whole filament. In the AEG K1 the emission has a maximum at the top of the filament and thus it burned at this spot in most cases after several hours of use. Siemens also used a punched grid whereas AEG grids are made from a spiral.
In WW1 AEG, Siemens and Telefunken had own tube production sites more looking like workshops. Later these sites have been consolidated and OSRAM built a lot of tubes for the mothercompanies.
|
| Tube prices |
5 Tube prices (visible for members
only)
|
|
|
|
|
K1: Nesper, Handbuch der drahtlosen Telegraphie (1921)
Nikolaus Löwe
|
Quantity of Models at Radiomuseum.org with this tube (valve, valves, valvola, valvole, válvula, lampe):2
Collection of
Collection of a member from D
| Documents about this component |
|
|
|
|
|
Forum contributions about this tube
K1
Threads: 1 | Posts: 2
|
Hits: 2892 Replies: 1
K1 (K1)
|
Wolfgang Thiel
10.Apr.07
|
1
Hi all
I just was able to buy an AEG tube type K1 from 1918 for my collection. Information on this tube is very sparse. On the existing tag it states the operating current as 0.52 A and the production year as 1918. Has someone in the forum any more details ( filament voltage, typical use) ? Any input would be much appreciated.Thanks
Wolfgang
|
Hans-Thomas Schmidt
11.Apr.07
|
2
Hello Wolfgang,
the K1 was used in the First World War for audio telephony amplification. You can find a lot of informations on this and other early tubes in the "tube bible" from Gerald F. J. Tyne: Saga of the vacuum tube (in english language).
Best regards from bavaria, Hans-Thomas
|
K1
End of forum contributions about this tube
You reach this tube or valve page from a search
after clicking the "tubes" tab or by clicking a tube
on a radio model page. You will find thousands
of tubes or valves with interesting links. You
even can look up radio models with a certain tube
line up.
[rmxtube-en]
| Data Compliance |
More Information |
|
|
|
