Antique radios, Old Time Radios
MF100/2000
|
Country:
Switzerland
|
|
| Identical to |
MF100/2000
|
| Base |
SPECIAL TUBEBASE in general
|
| Was used by |
Industrial |
| Filament |
Vf 3.5 Volts / If 6.5 Ampere / Direct |
| Description |
| |
Single-cavity interdigital magnetron. Twelve segments form the internal side of the anode doughnut resonating cavity. Due to the presence of the high Q single cavity integrated with the segments, this anode design granted the very high spectrum purity required, otherwise not possible with multi-cavity structures. The two side walls of the cavity were connected to the external line from the base. This 'Turbator' was intended to operate at fixed frequency in diathermy apparatus and low-power industrial heating.
- 1750 MHz output frequency
- 200 W anode power dissipation, 100 W CW output
- 2.2 to 2.5 kV anode voltage
- 100 mA anode current
- 1450 oersted magnetic field
|
Text in other
languages (may
differ)
|
Dimensions (WHD)
incl. pins / tip |
36 x 135 x mm / 1.42 x 5.31 x inch |
| Information source |
Schweizer Elektronenröhren 1917-2003, Willi E. Seite 77, 80
- - Manufacturers Literature
|
|
|
|
|
|
You reach this tube or valve page from a search
after clicking the "tubes" tab or by clicking a tube
on a radio model page. You will find thousands
of tubes or valves with interesting links. You
even can look up radio models with a certain tube
line up.
[rmxtube-en]
| Data Compliance |
More Information |
|
|
|
