radiomuseum.org

VR14A

Información - Ayuda 
ID = 75315
       
País:
Gran Bretaña (GB)
Marca: Cossor, A.C.; London
Diseñador: Cossor, A.C.; London 
Tipo:  Triode, vacuum   Detector 
Idéntica a VR14A

Base SPECIAL TUBEBASE in general
Usada en Militaire et/ou Services Publics
Filamento Vf 4 Volt / If 0.1 Ampere / Direct / Battery =
Descripción

This very rare tube was specially designed for use by the British RAF. It is fitted with an unusual bayonet base, similar in shape to the standard B22 base. One socket guide pin is normal size and the other about 3.5 mm diameter. The base shell has a solder contact, possibly for the anode. There are two soldered base contacts for the filament and a "half moon" shaped larger contact presumably for the grid. No information has so far been located to show a use for the tube. It has the manufacturers details on one side of the glass bulb and the British Air Ministry logo on the other side.

 
Dimensiones
(Alt,Ancho,Prof.)
incl.pins/tip
x 88 x 31 mm / x 3.46 x 1.22 inch
Literatura -- Collector info (Sammler)   

Colección personal de

 
cossor_vt14_1.jpg

VR14A
 

[rmxtube-en]
  

Cumplimiento de datos Más información