saba: Neutralization

I am trying to uderstand the neutralization adjustment for this radio (Freiburg 9). My understanding of the instructions is as follows:

Set VHF generator and receiver tuning to 93 MHz.

Switch off anode voltage of the previous stage (unsolder wire from solder-plug 2).

Increase input voltage to approx. 0.5 mV

Adjust C 204 to minimum for neutralization.

Re-solder the anode voltage from the previous step (wire to solder-plug 2)

Repeat steps 1 to 3 for precise adjustment.

I canot see "solder plug 2" on the schematic. Does this mean disconnect the anode/plate of the first EC92, even though this is Pin1?

Your advice would be appreciated.

To thank the Author because you find the post helpful or well done.

Ok now I see - it is on the layout diagram on the side of the FM can.

Problem solved.

To thank the Author because you find the post helpful or well done.