AWA Heterodyne Calibrator 7A8407

Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney

Data
Forum
Pictures
Collections

  • Year
  • 1942 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 300418

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 6
  • Main principle
  • 2 AF stage(s)
  • Wave bands
  • Wave Bands given in the notes.
  • Power type and voltage
  • Alternating Current supply (AC) / 220; 240; 260 Volt
  • Loudspeaker
  • - For headphones or amp.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: AWA Heterodyne Calibrator 7A8407 - Amalgamated Wireless
  • Shape
  • Tablemodel, with any shape - general.
  • Dimensions (WHD)
  • 14 x 9 x 8 inch / 356 x 229 x 203 mm
  • Notes

  • This instrument is intended primarily for the calibration of an oscillator by beating it with the fundamental or harmonic of a second calibrated oscillator or the internal crystal oscillator.  Two internal crystals can be used; 2 and 5 MHz.  An external crystal can be used.  The useable range of the calibrator is from approximately 200 kHz to 300 MHz.

    This model differs from the otherwise similar 8A8407 in the following ways:

    AWA nameplate.

    HMV type D4020A connectors.

    6 kΩ output impedance.

    Grey painted finish.

     

  • Net weight (2.2 lb = 1 kg)
  • 23 lb (23 lb 0 oz) / 10.442 kg
  • Literature/Schematics (1)
  • - - Manufacturers Literature
  • Author
  • Model page created by Stuart Irwin. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum