Cathode Ray Oscillograph 4R6673
Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney
- Country
- Australia
- Manufacturer / Brand
- Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney
- Year
- 1944
- Category
- Service- or Lab Equipment
- Radiomuseum.org ID
- 300476
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 6
- Wave bands
- - without
- Power type and voltage
- Alternating Current supply (AC) / 200-260 Volt
- Loudspeaker
- - - No sound reproduction output.
- Material
- Metal case
- from Radiomuseum.org
- Model: Cathode Ray Oscillograph 4R6673 - Amalgamated Wireless
- Shape
- Tablemodel, with any shape - general.
- Dimensions (WHD)
- 19 x 8.71875 x 0 inch / 483 x 221 x 0 mm
- Notes
-
This is a 2 inch oscilloscope. The response of the internal amplifiers was flat from 30 to 12 kHz, down 2.5 dB at 50 kHz. The time base was continuously adjustable from about 20 Hz to 30 kHz. Provision is made for connecting directly to the CRT deflection plates.
This model is similar to the 3R6673 except that it is for rack mounting; the connections being via rear mounted sockets.
- Literature/Schematics (1)
- - - Manufacturers Literature
- Author
- Model page created by Stuart Irwin. See "Data change" for further contributors.
- Other Models
-
Here you find 1430 models, 873 with images and 463 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Amalgamated Wireless (Australasia) Ltd. (AWA); Sydney