250 kW Short-Wave Broadcast Transmitter SK 53 F3-2P

BBC - Brown Boveri; Switzerland

  • Año
  • 1981 ??
  • Categoría
  • Transmisor comercial (TX no transceptor)
  • Radiomuseum.org ID
  • 329090

 Especificaciones técnicas

  • Numero de valvulas
  • 2
  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Principio principal
  • Transmitter
  • Gama de ondas
  • Onda Corta solamente
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 3-24 k Volt
  • Material
  • Metálico
  • de Radiomuseum.org
  • Modelo: 250 kW Short-Wave Broadcast Transmitter SK 53 F3-2P - BBC - Brown Boveri;
  • Forma
  • Rack
  • Anotaciones
  • The 250 kW Short-Wave Broadcast Transmitter, Type SK 53 C3-2P is fully automatic tuning equipped with a Pulse Step Modulator (PSM).

    Main features:

    • transistorized preliminary RF and AF stages
    • Pulse Step Modulator (PSM)
    • Only two tubes
    • all rectifiers with solid state elements
    • automatic tuning
    • unlimited choice of frequency in automatic tuning mode in broadcast bands; on special request outside bands
    • frequency change time maximum 60 seconds for automatic version
    • sinusoidal and trapezoidal modulation
    • possibility of high-power SSB service using PSM
    • easy provision of DCC
    • protective and automatic sequence circuits ensure safety of the equipment
    • personnel security system fulfills IEC 215-1
    • very simple layout of RF circuits ensures easy accessibility to components through doors at front and rear
    • very high overall efficiency
    Abridged Specifications  
    Carrier power output 250 kW over full frequency range
    Frequency range 5.95-21.85 MHz
    Output impedance 50 Ω unbalanced/300 Ω balanced (with balun)
    Permissible standing-wave ratio (SWR) 1:2.0 at 50 ohm output/1:1.7 at 300 ohm output
    Carrier noise level below m = 100% f = 1000 Hz unweighted: -55 dB
    Carrier shift with sudden application or removal of 100% modulation the variation in the carrier voltage will not exceed 5%
    AF input level for m = 100% modulation across 600 Ω balanced input impedance: 0 dBm - 20 dBm. Recommended 18 dBm
    Required time for frequency change 60s max
  • Mencionado en
  • - - Manufacturers Literature
  • Autor
  • Modelo creado por Gary Cowans. Ver en "Modificar Ficha" los participantes posteriores.

 Colecciones | Museos | Literatura

 Forum