Radiobell 537 (537U) EK2 - 110V
Bell Telephone Mfg. Co. (Radiobell); Antwerp
- Country
- Belgium
- Manufacturer / Brand
- Bell Telephone Mfg. Co. (Radiobell); Antwerp
- Year
- 1936/1937
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 232849
-
- Brand: Radiobell
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 6
- Main principle
- Superheterodyne (common); ZF/IF 142 kHz; 2 AF stage(s)
- Tuned circuits
- 7 AM circuit(s)
- Wave bands
- Broadcast, Long Wave and Short Wave.
- Power type and voltage
- AC/DC-set / 110 Volt
- Loudspeaker
- Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil)
- Material
- Wooden case
- from Radiomuseum.org
- Model: Radiobell 537 [EK2 - 110V] - Bell Telephone Mfg. Co.
- Notes
-
- This is a special variant of model 537U (EK2), only for 110V AC/DC, and no mains voltage selector.
- To compensate for the loss of output power associated with low anode voltage, the output stage is set up in push-pull and a stronger rectifier is used.
- The coupling between the 2 AF stages is done by a transformer, which does also the phase inversion for both output tubes.
- Mentioned in
- Radio Schema's, Deel II (1943 deel II)
- Author
- Model page created by Dirk Bladt. See "Data change" for further contributors.
- Other Models
-
Here you find 284 models, 243 with images and 118 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Bell Telephone Mfg. Co. (Radiobell); Antwerp