DB-6 breadboard
Browning-Drake Corp.; Brighton, Massachusetts
- Country
- United States of America (USA)
- Manufacturer / Brand
- Browning-Drake Corp.; Brighton, Massachusetts
- Year
- 1924/1925
- Category
- Kit (Parts plus instruction) or building instructions only
- Radiomuseum.org ID
- 84772
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 4
- Valves / Tubes
- Main principle
- TRF with regeneration
- Tuned circuits
- 2 AM circuit(s)
- Wave bands
- Broadcast only (MW).
- Power type and voltage
- Storage and/or dry batteries
- Loudspeaker
- - This model requires external speaker(s).
- Material
- Wooden case, TUBES VISIBLE.
- from Radiomuseum.org
- Model: DB-6 [breadboard] - Browning-Drake Corp.; Brighton
- Shape
- Miscellaneous shapes - described under notes.
- Notes
-
Breadboard kit for a Radio using the National Regenaformer on a Foundation Unit.
In a constructional paper Mr.Browning recommended the use of a UV199 or DV3 tube in the RF stage, and 3xUV201A for Det. and Audio. Alternatively (at reduced performance) 4xUV199 or 4xDV3 throughout. Then the initial recommendation was to use 4xUV201A or 4xDV3 or 4x UV199. Eventually the quoted combination was chosen with one UX199 and three UX201A. The UX199 received a separate fixed filament series resistor.
- Source of data
- Radio Manufacturers of the 1920s, Vol 1
- Author
- Model page created by Konrad Birkner † 12.08.2014. See "Data change" for further contributors.
- Other Models
-
Here you find 46 models, 20 with images and 14 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Browning-Drake Corp.; Brighton, Massachusetts
Literature
The model DB-6 is documented in the following literature.