Function generator 160A

BWD Electronics Pty Ltd.; Mulgrave, Victoria

Data
Forum
Pictures
Collections

  • Year
  • 1976 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 333462

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Wave bands
  • Wave Bands given in the notes.
  • Power type and voltage
  • Alternating Current supply (AC) / 200 - 265 Volt
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Function generator 160A - BWD Electronics Pty Ltd.;
  • Shape
  • Tablemodel, with any shape - general.
  • Dimensions (WHD)
  • 210 x 90 x 200 mm / 8.3 x 3.5 x 7.9 inch
  • Notes

  • The BWD 160A Function Generator provides 12 different waveforms and 5 simultaneous outputs.

    It can be swept over any section of its frequency range up to 4 decades wide by the BWD 170 log or linear ramp output. Pulse or ramp output of either polarity have a fived mark-space ratio of approximately 20-1 thus maintaining a constant calibration at 1/10th the indicated frequency.

    Sine, Square and Triangle outputs at a fixed 1 V p-p level are available on the rear panel and a 20-load capacity TTL output at the front.

    Main output is 20 V O/C with variable offset to ±10 V into 50 Ω.

    Freq. Range:  0.02 Hz to 20 MHz in 7 ranges
    Waveforms: Sine, Square, Triangle, +Pulse, -Pulse, +Ramp, -Ramp

     

  • Net weight (2.2 lb = 1 kg)
  • 1.9 kg / 4 lb 3 oz (4.185 lb)
  • Mentioned in
  • - - Manufacturers Literature
  • Author
  • Model page created by Xavier Motti. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Function generator is part of the collections of the following members.

 Forum