• Year
  • 1991
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 341525

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 220 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 500 W (unknown quality)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Power Amplifier A100 - Cambridge Audio Laboratories,
  • Shape
  • Tablemodel, low profile (big size).
  • Dimensions (WHD)
  • 430 x 85 x 320 mm / 16.9 x 3.3 x 12.6 inch
  • Notes
  • HiFi Stereo Power Amplifier

    A dual-monaural configuration is incorporated, and interference between channels is suppressed by putting two power amplifiers in one chassis.

    Two sets of high-efficiency toroidal transformers are installed in the power supply section, and two sets of custom-tune large capacitors are combined to improve low-frequency reproduction capability.

    The input has two systems, normal and filter, and the filter input has a built-in high-pass filter.

    Specifications

    • Power output: 100 watts per channel into 8Ω (stereo)
    • Frequency response: 5Hz to 50kHz
    • Total harmonic distortion: 0.006%
    • Input sensitivity: 1V
    • Signal-to-noise ratio: 100dB

     

  • Net weight (2.2 lb = 1 kg)
  • 9.8 kg / 21 lb 9.4 oz (21.586 lb)
  • Author
  • Model page created by Carlos Saavedra. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Power Amplifier is part of the collections of the following members.

 Forum