Special 51S
Crosley Radio Corp.; Cincinnati (OH)
- Country
- United States of America (USA)
- Manufacturer / Brand
- Crosley Radio Corp.; Cincinnati (OH)
- Year
- 1924
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 185896
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 2
- Valves / Tubes
- Wave bands
- Broadcast only (MW).
- Power type and voltage
- Storage and/or dry batteries
- Loudspeaker
- - This model requires external speaker(s).
- Material
- Wooden case
- from Radiomuseum.org
- Model: Special 51S - Crosley Radio Corp.;
- Shape
- Tablemodel, slant panel.
- Dimensions (WHD)
- 12.5 x 8.5 x 12 inch / 318 x 216 x 305 mm
- Notes
-
This is the Crosley Model 51S Special. It has 3 knobs and 2 tubes. It has a different front panel from the Crosely 51SD Special Deluxe.
Operating instructions (see tech.info) show a choice of completely different tube configurations:
2 x UV201A needs a 6 v storage "A" Battery
2 x WD12 uses 1.5 v dry "A" Battery
2 x UV199 requires 3 x 1.5 v (= 4.5 v) dry batteries plus socket adaptors.
Same is valid for the Cunningham equivalents.
Later models could also use the following combinations:
2 x UX199;
2 x UX201A;
and for increased output power:
UX201A and UX112A
UX201A and UX171A;
UX199 and UX120;
Later models have a terminal to connect a "C" bias battery in case of operation with an output tube of increased power: UX112A (max0.2 Watt); UX171A (max.0.7 Watt); UX120 (max.0.11 Watt).
- Net weight (2.2 lb = 1 kg)
- 4 lb (4 lb 0 oz) / 1.816 kg
- Mentioned in
- Collector's Guide to Antique Radios (7th Edition) (page 66)
- Author
- Model page created by Jon Kummer. See "Data change" for further contributors.
- Other Models
-
Here you find 1791 models, 1049 with images and 1285 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Crosley Radio Corp.; Cincinnati (OH)
Forum contributions about this model: Crosley Radio Corp.;: Special 51S
Threads: 1 | Posts: 1
El tanque de sintonía del 51S difiere notablemente del modelo 51. La bobina de sintonía tipo "spidweb" esta formada por 32 espiras con un diámetro exterior de 90 mm. y cuenta con una toma a las 6 espiras, que va conectada a tierra. La parte de 26 espiras en paralelo con el condensador forman el circuito de sintonía en tanto que la toma de 6 espiras se conecta a la antena.
La bobina de realimentación es similar a la del modelo 51.
Attachments
Felix Corrochano, 20.Oct.16