Dynatuner FM-3
Dyna Co. (Dynaco); Philadelphia PA
- Country
- United States of America (USA)
- Manufacturer / Brand
- Dyna Co. (Dynaco); Philadelphia PA
- Year
- 1964
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 87842
Front view. Fair condition.
aus ebay, Verkäufer oldhifi
aus ebay, Verkäufer oldhifi
aus ebay, Verkäufer oldhifi
aus ebay, Verkäufer mrdalis
aus ebay, Verkäufer dtsecrt
aus ebay, mit Erlaubnis des Verkäufers mono
Dyna Co Advertise
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 11
- Main principle
- Superhet with RF-stage; ZF/IF 10700 kHz
- Tuned circuits
- 13 FM circuit(s)
- Wave bands
- FM Broadcast Band Only
- Power type and voltage
- Alternating Current supply (AC)
- Loudspeaker
- - For headphones or amp.
- Material
- Metal case
- from Radiomuseum.org
- Model: Dynatuner FM-3 - Dyna Co. Dynaco; Philadelphia
- Shape
- Book-shelf unit.
- Notes
- FM stereo tuner
- Price in first year of sale
- 129.00 $
- Mentioned in
- -- Original-techn. papers.
- Author
- Model page created by Gottfried Silberhorn. See "Data change" for further contributors.
- Other Models
-
Here you find 27 models, 27 with images and 18 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Dyna Co. (Dynaco); Philadelphia PA
Collections
The model Dynatuner is part of the collections of the following members.
Forum contributions about this model: Dyna Co. Dynaco;: Dynatuner FM-3
Threads: 1 | Posts: 3
Hello everyone .
I have a problem with one dynaco fm3 . The discriminator transformer is unalignable , I can't get less than -2,5v on eyelet 32 so the signal does not pass ( normally there should be at least -8v)
The rf board , the if board and the multiplex section are working fine , the only problem seems to be the discriminator transformer itself .
I also opened the transformer , refreshed the solder joints and tried to replace the pair of diodes inside the transformer and the 33pF capacitor but no success
Does anyone have any idea of what the problem should be and how to solve ?
Thank you , Antonio
Antonio Fabio Colorito, 24.Jun.12