Viking RMB-253
Eaton Co. Ltd., The T. (Viking); Toronto
- Country
- Canada
- Manufacturer / Brand
- Eaton Co. Ltd., The T. (Viking); Toronto
- Year
- 1955 ?
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 301664
From RCC manual.
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 5
- Main principle
- Superhet with RF-stage; ZF/IF 455 kHz; 2 AF stage(s)
- Tuned circuits
- 7 AM circuit(s)
- Wave bands
- Broadcast only (MW).
- Power type and voltage
- Dry Batteries / 1.5 & 2 x 45 Volt
- Loudspeaker
- Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) - elliptical
- Power out
- 0.1 W (0.25 W max.)
- from Radiomuseum.org
- Model: Viking RMB-253 - Eaton Co. Ltd., The T. Viking;
- Shape
- Tablemodel, with any shape - general.
- Notes
-
The Canadian Viking model RMB-253 is a battery operated table radio. Requires an external wire antenna. With 4 x 6 inch oval speaker. It was manufactured by Dominion Electrohome for the Eatons department and catalog store chain. Similar to Viking model 54-55.
- Literature/Schematics (1)
- Radio College of Canada (RCC) (1956 supplement 37)
- Author
- Model page created by Tom Seeger. See "Data change" for further contributors.
- Other Models
-
Here you find 246 models, 129 with images and 223 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Eaton Co. Ltd., The T. (Viking); Toronto