FM Stereo AM/SW PLL Radio MP3 BT REC Player K-603 K603BT-W

Hanrongda Electronic Co. Ltd.; Shenzhen

  • Year
  • 2024 ?
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 356404

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • DSP, Digital Signal Processor
  • Wave bands
  • Broadcast, more than 2 SW bands plus FM or UHF.
  • Details
  • HD or solid state memory
  • Power type and voltage
  • Batteries / addl. power jack / Li-Ion 3.7 / USB 5 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 4 cm = 1.6 inch
  • Power out
  • 1.6 W (unknown quality)
  • Material
  • Plastics (no bakelite or catalin)
  • from Radiomuseum.org
  • Model: FM Stereo AM/SW PLL Radio MP3 BT REC Player K-603 K603BT-W - Hanrongda Electronic Co. Ltd.;
  • Shape
  • Very small Portable or Pocket-Set (Handheld) < 8 inch.
  • Dimensions (WHD)
  • 120 x 79 x 23 mm / 4.7 x 3.1 x 0.9 inch
  • Notes
  • The HRD K-603 is world band digital pocket radio, recorder, BT, and MP3 player.

    Main specifications

    • FM band: 64-108 MHz
    • MW band: 522-1710 kHz (9 kHz), or 520-1710 (10 kHz), selectable
    • SW band: 4.75-21.85 MHz(nine meter bands)
    • 440 radio presets (auto-scan and direct entry)
    • Sleep timer
    • BT version 5.0
    • MP3/WMA/WAV format music player
    • Recorder from buitl-in microphone, from 3.5 mm Aux Line in, or from radio
    • 3.5mm stereo headphone jack
    • MicroSD card slot up to 32 GByte
    • BL-5C 1000 mAh rechargeable lithium battery
    • Charging: DC 5 V, USB-C interface

    Brief technical description

    The PCB assembly reference is K603BT-W 2024.1.8

    This is the latest (yaer 2024) version with a redesigned circuit and PCB layout.

    Firmware version v2.4.

    The radio uses a AKC6958 DSP and a S9018 front-end transistor. A MIX2018 audio power amplifier drives the built-in 3Watt 4 Ohm speaker. A CN2C14B5A media controller by A3 and a P42473 TJ25008M flash memory handles BT, MP3 functions and radio management. The battery charger uses just a current limiter based on a power diode and 1R0 resistor.

     

     

  • Net weight (2.2 lb = 1 kg)
  • 0.150 kg / 0 lb 5.3 oz (0.33 lb)
  • Author
  • Model page created by Jose Mesquita. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model FM Stereo AM/SW PLL Radio MP3 BT REC Player is part of the collections of the following members.

 Forum