Fm-Am 4 Channel Stereo Receiver 4VR-5426X

JVC - Victor Company of Japan, Ltd.; Tokyo

  • Year
  • 1973–1977 ?
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 148665

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Superheterodyne (common); ZF/IF 455/10700 kHz
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 100; 120; 220; 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 60 W (undistorted)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Fm-Am 4 Channel Stereo Receiver 4VR-5426X - JVC - Victor Company of Japan,
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 476 x 163 x 391 mm / 18.7 x 6.4 x 15.4 inch
  • Notes
  • An AC mains receiver with an AM/FM stereo tuner and a quadrophonic amplifier with output power of 4 x 13 watts RMS or 2 x 30 watts RMS into 8 ohms. With BTL (Bridge Tied Load) double power stereo sound, built-in CD-4 demodulator for 4 channel phono cartridge and tape and with a Det Out connection for an FM 4 channel broadcast demodulator.

    Specification  
    FM Tuner Section  
    Tuning range  88 - 108MHz
    Usable sensitivity 2.2µV (IHF)
    THD Mono 0.5%, Stereo 0.8%
    S/N Ratio 68dB (at 1mV)
    Selectivity 60dB (IHF, Alt. channel)
    AM Tuner Section  
    Tuning range 525 - 1605kHz
    Usable sensitivity 30µV, 200µV/m
    Selectivity 30dB
    Audio Section  
    RMS power all channels driven
    20Hz-20kHz  at 8Ω & 4Ω
    13W per Channel
    BTL at 8Ω 30W x 2
    Total dynamic power IHF at 8Ω  /  4Ω 112W / 148W
    IHF power bandwidth 10Hz - 40kHz
    Total Harmonic Distortion 1.0%
    IM distortion 1.0%
    Frequency response 20Hz - 30kHz ±1dB
    Load impedance (4-channel) 4 - 16Ω (BTL 8 - 16Ω)
    Damping factor 30 at 8Ω
    Input Sensitivity / Impedance/ S/N ratio
     for rated power
     
    Phono 1.5mV / 100kΩ / 65dB
    Aux 200mV / 50Ω / 75dB
    Tape Play 200mV / 50Ω / 75dB
    Recording Output  
    Tape Rec. 200mV

    Versions/Power Requirements
          USA: 120V AC 50/60Hz
    M - Canada: 120V AC 50/60Hz
    E - Europe: 220V AC 50Hz
    A - Australia, UK: 240V AC 50Hz
    F - Europe, Semko, Sev: 100/120/220/240V AC 50/60Hz selectable
    P - Pacex, Nex: 100/120/220/240V AC 50/60Hz selectable
    U -  Other countries: 100/120/220/240V AC 50/60Hz selectable

    FM De-Emphasis
    75µs  USA, Canada, Pacex, Nex, Other
    50µs  Europe, England, Australia, Semko, Sev

    AM/FM-Quadrofonie/stereo-Receiver mit CD-4, BTL.
    4 x 18 Watt Sinus an 4 Ohm.

  • Net weight (2.2 lb = 1 kg)
  • 12.2 kg / 26 lb 14 oz (26.872 lb)
  • Source of data
  • -- Original prospect or advert
  • Mentioned in
  • - - Manufacturers Literature (1977 JVC HiFi-Katalog)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (JVC Service manual 4VR-5426X 4 Channel Stereo Receiver)
  • Literature/Schematics (2)
  • - - Manufacturers Literature (Instruction Book JVC 4VR-5426X 4 Channel Receiver)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Fm-Am 4 Channel Stereo Receiver is part of the collections of the following members.

 Forum