Cathode Ray Oscilloscope OP-31C

Kikusui Denpa, later Kikusui Electronics; Yokohama

  • Year
  • 1960 ?
  • Category
  • Service- or Lab Equipment
  • Radiomuseum.org ID
  • 318392

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 9
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 100 Volt
  • Loudspeaker
  • - - No sound reproduction output.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Cathode Ray Oscilloscope OP-31C - Kikusui Denpa, later Kikusui
  • Shape
  • Tablemodel, with any shape - general.
  • Dimensions (WHD)
  • 186 x 272 x 330 mm / 7.3 x 10.7 x 13 inch
  • Notes
  • Y amplifier: AC coupled, 1 MHz max. bandwith (-3 dB point)

    Input impedance:
    2.2 MΩ @ 15 pF +/-3 pF (Using internal amplifier)
    2.2 MΩ @ 30 pF +/-3 pF (Using direct connection to deflection plates, bypassing internal amp)

    Maximum input voltage:
    50 V P-P using internal amp
    250 V p-p using direct connection

    Deflection sensitivity:
    80 mV P-P/cm using internal amp
    22 V P-P/cm using direct connection
     

  • Net weight (2.2 lb = 1 kg)
  • 7.8 kg / 17 lb 2.9 oz (17.181 lb)
  • Literature/Schematics (1)
  • - - Manufacturers Literature
  • Author
  • Model page created by Jared Cabot. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Cathode Ray Oscilloscope is part of the collections of the following members.

 Forum