Stereo Integrated Amplifier ST60

Metrosound Manufacturing Company Limited; Essex

  • Year
  • 1973 ?
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 327833

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 110; 230; 250 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 60 W (undistorted)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Stereo Integrated Amplifier ST60 - Metrosound Manufacturing
  • Shape
  • Tablemodel, low profile (big size).
  • Dimensions (WHD)
  • 20.125 x 3.75 x 12.375 inch / 511 x 95 x 314 mm
  • Notes
  • A stereo integrated amplifier with power output of 2 x 30 watts RMS into 8 ohms. Piano Key selector switches for On/Off, Speakers, H.F. Filters, Mono/Stereo, Phono, Tuner, Aux. and Tape facilities. Slider controls for Volume, Balance, Filter Slope, Bass, Middle and Treble. DIN sockets for input Phono, Tuner, Monitor/Aux and for input/output Tape, switch for phono input sensitivity (3mV, 10mV), DIN sockets for 1 pair of loudspeakers, 2 AC mains outlets and a headphone socket.

    Output impedance: 4Ω - 16Ω per channel
    Frequency response: 30Hz-50kHz
    Total harmonic distortion: 0.08%
    Hum and Noise: Phono input > -65dB, other inputs -70dB

    Semiconductors: 31 transistors, 26  diodes

  • Net weight (2.2 lb = 1 kg)
  • 18 lb (18 lb 0 oz) / 8.172 kg
  • Mentioned in
  • -- Original prospect or advert (1973 HiFi Year Book)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Owner's Manual Metrosound ST60)
  • Author
  • Model page created by Michael Waitz. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Stereo Integrated Amplifier is part of the collections of the following members.

 Forum