- Country
- Netherlands
- Manufacturer / Brand
- Philips; Eindhoven (tubes international!); Miniwatt
- Year
- 1949
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 96939
- Number of Tubes
- 6
- Main principle
- Superheterodyne (common); ZF/IF 452 kHz
- Wave bands
- Broadcast plus more than 2 Short Wave bands.
- Power type and voltage
- AC/DC-set / 110-220 Volt
- Loudspeaker
- Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil)
- Material
- Bakelite case
- from Radiomuseum.org
- Model: BX495U - Philips; Eindhoven tubes
- Shape
- Tablemodel, low profile (big size).
- Dimensions (WHD)
- 17.5 x 12 x 9 inch / 445 x 305 x 229 mm
- Notes
- Does also have a band for fishery frequencies.
- Price in first year of sale
- 275.00 Hfl
- Source of data
- Technisch- Commercieel - Radio Vademecum Staleman
- Author
- Model page created by John Koster. See "Data change" for further contributors.
- Other Models
-
Here you find 5250 models, 4394 with images and 3451 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Philips; Eindhoven (tubes international!); Miniwatt
Forum contributions about this model: Philips; Eindhoven: BX495U
Threads: 1 | Posts: 4
I am restoring a Philips BX495u that is in very poor condition. One of the parts that seems to be beyond repair is the output transformer. It is contained in a cube box filled with some very hard black resin. It code is A3 168 71.4 (see image, with the cover -and some resin- removed).
I could not in a schematic for this model but I am using those of BX485u/BX491u (no magic eye) and BX505u that are very similar. The equivalent part in these model is coded A3 168 71.0 (485u and 505u) and A3 151 48.0 (491u). Howver the 1949 revison of BX485u uses the same code as my model.
The unit contains a number of connection in the secondary. Apart from forming the speaker's transformer, they give feedback tension for the volume control. These are labelled S45-46-47-48-49-50-55 in the schematics of all models.
The tester indicates that the primary is cut (burned?) but due to the presence of the back resin, it seems impossible to have access and try to repair.
Can anybody help finding a replacement part or suggest an alterantive solution.
Many thanks in advance
Best regards
León
Please pictures only <560Pixels !!!
I edit it to the right size. Regards Wolfgang Bauer
Leon Ouziel Canals, 14.Jun.09