Goya SL - D26K965 Ch= K7N
Philips Radios - Deutschland
- Country
- Germany
- Manufacturer / Brand
- Philips Radios - Deutschland
- Year
- 1970
- Category
- Television Receiver (TV) or Monitor
- Radiomuseum.org ID
- 104721
-
- Brand: Deutsche Philips-Ges.
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 14
- Number of Transistors
- 54
- Semiconductors
- Main principle
- Superheterodyne (common)
- Wave bands
- VHF incl. FM and/or UHF (see notes for details)
- Details
- Remote Control (with wire or wireless)
- Power type and voltage
- Alternating Current supply (AC) / 220 Volt
- Loudspeaker
- Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil)
- Material
- Wooden case
- from Radiomuseum.org
- Model: Goya SL - D26K965 Ch= K7N - Philips Radios - Deutschland
- Shape
- Tablemodel with Push Buttons.
- Dimensions (WHD)
- 750 x 530 x 580 mm / 29.5 x 20.9 x 22.8 inch
- Notes
- 61 Dioden, 1 IC. Röhren teilweise mehrfach vorhanden. Tuner mit Kapazitätsdioden für VHF und UHF.
- Net weight (2.2 lb = 1 kg)
- 50 kg / 110 lb 2.1 oz (110.132 lb)
- Mentioned in
- -- Original-techn. papers.
- Literature/Schematics (1)
- -- Schematic
- Author
- Model page created by Franz Born †. See "Data change" for further contributors.
- Other Models
-
Here you find 2543 models, 2255 with images and 1564 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Philips Radios - Deutschland
Forum contributions about this model: Philips Radios -: Goya SL - D26K965 Ch= K7N
Threads: 1 | Posts: 3
Hello to everybody. I have a Philips Goya D26K965 TV. When I purchased it, it worked fine. It was revised just before I bought it. Few days after it fault. So I opened it to see what appened and I saw that when I push the main power button to on, a spark where produced from an electronic component. I downloaded the electronic schematic from this site of a similar TV with K7N chassis to view electronic components. The corresponding component is R891 which is a NTC thermistor. The problem is that any value is specified on the schematic. So I'm asking: does anybody knows which is the value of this thermistor? Any help will be very appreciated. Thank you!!!
Marco Salvadeo, 18.Sep.13