Stereo Amplifier A-6

Pioneer Corporation; Tokyo

  • Year
  • 1981/1982
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 151098

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 120; 240; 220/240; 110/120/220/240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 120 W (undistorted)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Stereo Amplifier A-6 - Pioneer Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 420 x 98 x 367 mm / 16.5 x 3.9 x 14.4 inch
  • Notes
  • A hi-fi stereo "Non-Switching" integrated amplifier housed in a champagne gold metal case with a Pictographic display, with continuous power output of 2 x 60 watts into 8 ohms. LED power meter. Terminals for 2 pairs of loudspeakers, jack for headphones.

    Integrierter "Non-Switching"-Stereo-Verstärker in Gleichstrom-Servotechnik; Pictographische Anzeige. 2 x 75 Watt Sinus an 8 Ohm (DIN).

    Specification  
    Circuit Non-switching Amp using high speed 
    bias servo-control circuit in power  
    stage. OCL and ICL configuration      
    obtained by using dual FET differential
     input amp and DC servo-control circuit.
    Continuous Power Output 60 watts per channel, min. into 8Ω
    from 20Hz — 20,000Hz
    with no more than 0.008% THD
    Total Harmonic Distortion
    (20Hz — 20,000Hz, 8Ω from AUX)
     
     Continuous rated output
     30 watts per channel output
    No more than 0.008%
    No more than 0.006%
    IM Distortion 8Ω, from AUX)  
     Continuous rated output
     30 watts per channel output
    No more than 0.006%
    No more than 0.004%
    Damping Factor (20Hz — 20,000Hz, 8Ω) 60
    Input Sensitivity/Impedance  
     PHONO MM
     PHONO MC
     TUNER, AUX, TAPE PLAY 1,2
    2.5mV/50kΩ
    0.25mV/100Ω
    150mV/50kΩ
    Output (Level/Impedance)  
     TAPE REC 1,2
     Speaker
    150mV/2.7kΩ
    A/OFF, B/OFF (6—16Ω)
    Frequency Response  
     PHONO MM (RIAA Equalization)
     TUNER. AUX. TAPE PLAY 1,2
    20Hz—20,000Hz ±0.2dB
    5Hz—100,000Hz -0dB,-3dB
    Filter  
     LOW (SUBSONIC) 15Hz (6dB/oct.)
    Hum and Noise (IHF, short-circuited A network)  
     PHONO MM
     PHONO MC
     TUNER, AUX, TAPE PLAY 1,2
    86dB
    70dB
    100dB
    Hum and Noise
    (DIN, continuous Power/50mW)
     
     PHONO MM
                   MC
     TUNER, AUX, TAPE PLAY
    80dB/66dB
    70dB/65dB
    95dB/69dB

    Versions/Power requirements

    KU USA 120V AC 60Hz
    KC Canada 120V AC 60Hz
    HE Europe 220V/240V AC 50/60Hz (Switchable)
    HB UK 240V/220V AC 50/60Hz (Switchable)
    YP Australia 240V AC 50/60Hz
    S General 110V/120V/220V/240V AC 50/60Hz with voltage selector
  • Net weight (2.2 lb = 1 kg)
  • 7 kg / 15 lb 6.7 oz (15.419 lb)
  • Source of data
  • -- Original prospect or advert
  • Mentioned in
  • - - Manufacturers Literature (1981/82 Pioneer Hi-Fi Stereo catalogue)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Service manual Pioneer A-6 dated Apr 1981)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Stereo Amplifier is part of the collections of the following members.

 Forum