Stereo Amplifier SA-8800

Pioneer Corporation; Tokyo

Data
Forum
Pictures
Collections

  • Year
  • 1979–1981
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 315473

 Technical Specifications

  • Number of Transistors
  • 73
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 120; 220/240; 110/120/220/240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 160 W (undistorted)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Stereo Amplifier SA-8800 - Pioneer Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 420 x 150 x 425 mm / 16.5 x 5.9 x 16.7 inch
  • Notes

  • A hi-fi stereo integrated amplifier housed in a metal case (HG, S) or walnut grained wooden case (KU, KC, S/G) with a digital display, with continuous power output of 2 x 80 watts into  8 ohms or 2 x 100 watts into 4 ohms. Preamplifier and Main amplifier sections can be separated.

    2 x 80 Watt Sinusleistung an 8 Ohm bei Klirrfaktor von 0,005% (10-20.000 Hz)
    Eingänge: 2x Plattenspieler, 2x TB, 1x Tuner, 1x Reserve, 2 Paar LS, 1x Kopfhörer.

    Power Amplifier Section  
    Continuous Power Output

         		 80W per channel, min., into 8Ω or 4Ω
    from 10Hz—20kHz
    with no more than 0.005% THD
    Continuous Power Output
    10Hz—50kHz    		 80W + 80W (THD 0.01%, 8Ω)
    100W + 100W (THD 0.02%, 4Ω)
    Total Harmonic Distortion 10Hz—20kHz  
     continuous rated output
     40 watts per channel into 8Ω    		 =< 0.005%
    =< 0.004%
    IM Distortion  
     continuous rated output
     40 watts per channel into 8Ω    		 =< 0.002%
    =< 0.002%
    Frequency Response  5Hz—200kHz +0dB,-2dB (POWER AMP IN)
    Input
    Sensitivity/Impedance
    1V/50kΩ (POWER AMP IN)
    Outputs
     Speaker
     Headphones
    A, B, A+B
    Low impedance
    Damping Factor
    20Hz—20kHz, 8Ω 
    55
    Preamplifier Section  
    Inputs
    Sensitivity/Impedance    		  
     PHONO 1, 2
     TUNER, AUX
     TAPE PLAY 1, 2    		 2.5mV/50
    150mV/50kΩ
    150mV/50kΩ
    Cartridge Load
    Both Phono 1 and 2    		 100, 10k, 25k, 50k, 100k Ω
    100, 200, 300, 400, 500 pF
    Outputs
    Level/Impedance    		  
     TAPE REC 1, 2
     PRE OUT    		 150mV
    1V/600Ω, 3V/600Ω (max.)
    Total Harmonic Distortion
    10Hz—50kHz, 1V output 
    =< 0.006%
    Frequency Response  
     PHONO (RIAA Equalization)
     TUNER, AUX, TAPE PLAY    		 20Hz—20KHz ±0.2dB
    5Hz—100kHz +0dB,-1dB

    Semiconductors: 3 ICs, 6 FETs, 73 Transistors, 49 Diodes, 2 Others

    Versions/Power Requirements

    KU USA 120V AC 60Hz
    KC Canada 120V AC 60Hz
    HG Europe, Oceania 220V/240V AC 50/60Hz with voltage selector
    S/G US Military 110V/120V/220V/240V AC 50/60Hz with voltage selector
    S General 110V/120V/220V/240V AC 50/60Hz with voltage selector

    Power consumption:  260W (KU, KC), 700W (HG), 220W (S, S/G)

    Dimensions wooden case (WHD): 453x155x425mm

  • Net weight (2.2 lb = 1 kg)
  • 15 kg / 33 lb 0.6 oz (33.04 lb)
  • Mentioned in
  • -- Original prospect or advert (Aus dem Pioneer Prospekt der HIFI Düsseldorf 1980.)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (1979/80 & 1980/81 Pioneer Hi-Fi Stereo catalogues)
  • Literature/Schematics (2)
  • - - Manufacturers Literature (Service manual Pioneer SA-8800 dated Mar 1979)
  • Author
  • Model page created by Hilmer Grunert. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Stereo Amplifier is part of the collections of the following members.

 Forum