Stereo Amplifier SA-9500
Pioneer Corporation; Tokyo
- Country
- Japan
- Manufacturer / Brand
- Pioneer Corporation; Tokyo
- Year
- 1975/1976
- Category
- Audio Amplifier or -mixer
- Radiomuseum.org ID
- 107991
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Transistors
- 56
- Semiconductors
- Main principle
- Audio-Amplification
- Wave bands
- - without
- Details
- Hi-Fi equipment
- Power type and voltage
- Alternating Current supply (AC) / 120; 220; 120/220/240 Volt
- Loudspeaker
- - This model requires external speaker(s).
- Power out
- 160 W (undistorted)
- Material
- Metal case
- from Radiomuseum.org
- Model: Stereo Amplifier SA-9500 - Pioneer Corporation; Tokyo
- Shape
- Book-shelf unit.
- Dimensions (WHD)
- 420 x 165 x 403 mm / 16.5 x 6.5 x 15.9 inch
- Notes
-
A hi-fi stereo integrated amplifier housed in a heavy duty metal case with continuous power output of 80 watts per channel, min. RMS into 8 ohms or 100 watts per channel into 4 ohms from 20Hz to 20,000Hz with no more than 0.1% THD.
Specification Continuous Power Output
1kHz (Both channels driven)85 watts per channel into 8Ω
110 watts per channel into 4ΩTHD (20Hz—20,000Hz) Continuous rated power output
40 watts per channel power output 8ΩNo more than 0.1%
No more than 0.05%Intermodulation Distortion Continuous rated power output
40 watts per channel power output 8ΩNo more than 0.1%
No more than 0.05%Frequency Response 10Hz—80,000Hz +0dB,-1dB Input Sensitivity/Impedance 1V/50kΩ (POWER AMP. IN) Output Speaker
HeadphoneA, B, A+B
Low impedanceDamping Factor 30 (20Hz—20,000Hz, 8Ω) Hum and Noise 100dB (IHF short-circuited A network) PREAMPLIFIER SECTION Inputs
Sensitivity/ImpedancePHONO 1
PHONO 2
MIC
TUNER
AUX 1 & 2
TAPE PB 1 & 22.5mV/50kΩ
2.5mV—10mV/35, 50, 70, 100kΩ
6mV—24mV/85kΩ
150mV/50kΩ
150mV/50kΩ
150mV/50kΩOutputs
Level/ImpedanceTAPE REC 1 & 2
PRE OUT150mV
2V/1kΩTHD No more than 0.05% (20Hz—20KHz) Frequency Response PHONO (RIAA equalization)
TUNER, AUX, TAPE PB30Hz—15KHz ±0.2dB
7Hz—40KHz +0dB,-1dBFilter LOW
HIGH15Hz, 30Hz (12dB/oct.)
8KHz, 12KHz (12dB/oct.)Hum and Noise
(IHF, short-circuited A network)PHONO
MIC
TUNER, AUX, TAPE PB70dB
65dB
90dBAttenuator 0, -15dB, -30dB Semiconductors: 2 FETs, 54 Transistors, 26 Diodes
Versions/Power requirements
KCU USA, Canada / 120V AC 60Hz
GN Scandinavia / 220V AC 50/60Hz
D General Export / 120/220/240V AC 50/60Hz with voltage selectorPower consumption: 370 watts (KCU), 310 watts (GN, D)
Superceded by the Pioneer SA-9500 II (2) Stereo Amplifier.
- Net weight (2.2 lb = 1 kg)
- 20 kg / 44 lb 0.8 oz (44.053 lb)
- Price in first year of sale
- 1,580.00 DM
- Source of data
- - - Data from my own collection
- Mentioned in
- - - Manufacturers Literature (1975/76 Pioneer Hi-Fi Stereo Components catalogue)
- Literature/Schematics (1)
- - - Manufacturers Literature (1976/77 Pioneer Hi-Fi Stereo catalogue)
- Literature/Schematics (2)
- - - Manufacturers Literature (Service manual Pioneer SA-9500)
- Author
- Model page created by George Cokkinides. See "Data change" for further contributors.
- Other Models
-
Here you find 1147 models, 1131 with images and 201 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Pioneer Corporation; Tokyo
Collections
The model Stereo Amplifier is part of the collections of the following members.