Solid State Stereo Receiver SX-700T USA

Pioneer Corporation; Tokyo

Data
Forum
Pictures
Collections

  • Year
  • 1968 ?
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 243015

 Technical Specifications

  • Number of Transistors
  • 43
  • Semiconductors
  • Main principle
  • Superheterodyne (common); ZF/IF 455/10700 kHz
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 117 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 50 W (60 W max.)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Solid State Stereo Receiver SX-700T [USA] - Pioneer Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 16 x 5.625 x 13.8125 inch / 406 x 143 x 351 mm
  • Notes

  • A solid-state stereo hi-fi receiver with an analogue dial housed in a metal case (wooden cabinet optional) with an AM/FM stereo tuner and an integrated amplifier with 2 x 25 watts RMS output power into 8 ohms or 2 x 19 watts RMS output power into 16 ohms, total music power output 60 watts.

    Stereo-AM/FM-Receiver mit 2x 25 Watt Sinus an 8 Ohm. Holzwangen optional.

    Specification  
    FM Section  
    Frequency Range 87-108MHz
    IHF Usable Sensitivity 2.2µV
    Image Rejection 60dB (at 98MHz)
    S/N Ratio 60dB (100% MOD)
    Antenna Input 300Ω (balanced)
    Channel Separation > 35dB (at 1kHz)
    AM Section  
    Frequency Range 525-1605kHz
    IHF Usable Sensitivity 18µV
    Image Rejection 55dB (at 1000kHz)
    Antenna Input Built-in Ferrite loopstick antenna with
    terminal for external antenna
    Audio Section  
    RMS Rated Power Output 25 watts per channel (8Ω)
    19 watts per channel (16Ω)
    Music Power Output 60 watts total (IHF)
    Harmonic Distortion < 1% (at 1kHz rated output)
    Frequency Response 25Hz to 50kHz ±1dB
    Power Bandwidth 15Hz to 30kHz (AUX)
    Damping Factor 35 (8Ω)
    Inputs  
    Impedance/Sensitivity (1kHz)
    MAGnetic PHONO
    TAPE HEAD
    TAPE MONITOR
    AUXiliary    		 2.1 mv / 50kΩ
    1.4 mv / 120kΩ
    250 mv / 160kΩ
    190 mv / 160kΩ
    Outputs  
    Terminals and Jacks
     
     
     
         		 Speakers: 4-16Ω
    Stereo headphones jack
    Simultaneous tape Recording jacks,
     equipped with TAPE MONITOR switch
    Tape recording/playback jack (DIN)
    Equalization Curves PHONO: RIAA, TAPE: NAB

    Semiconductors: 43 Transistors, 22 Diodes, 1 Zener Diode

    Versions/Power requirements
    USA / AC 117V 50/60Hz

    Power consumption: 95 watts max.

    Same as the Pioneer SX-700T SX-700TF version apart from voltage options.

  • Net weight (2.2 lb = 1 kg)
  • 20 lb 0 oz (20 lb) / 9.080 kg
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Operating Instructions and Service Manual Pioneer SX-700T)
  • Author
  • Model page created by Joachim Schuette. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum