Stereo Receiver SX-1000TW

Pioneer Corporation; Tokyo

  • Year
  • 1971
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 234033

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • 43
  • Semiconductors
  • Main principle
  • Superheterodyne (common); ZF/IF 455/10700 kHz
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 110/117/130/220/240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 100 W (150 W max.)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Stereo Receiver SX-1000TW - Pioneer Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 405 x 137 x 350 mm / 15.9 x 5.4 x 13.8 inch
  • Notes
  • A solid state hi-fi stereo receiver with an analogue dial housed in a wooden case, with a 2 band AM/FM stereo tuner and integrated amplifier with power output of 2 x 50 watts RMS into 8 ohms.

    Specification  
    FM Section  
    Frequency Range 87-108MHz
    IHF Usable Sensitivity 1.7µV
    Image Rejection 76dB (at 98MHz)
    S/N Ratio 65dB (IHF Rating)
    Capture Ratio 1dB (at 98MHz)
    Antenna Input 300Ω (balanced)
    Channel Separation 37dB (at 1kHz)
    AM Section  
    Frequency Range 525-1605kHz
    IHF Usable Sensitivity 20µV
    Image Rejection 60dB (at 1000kHz)
    Antenna Input Built-in Ferrite Loopstick antenna
    Audio Section  
    Rated Power Output 50 watts per channel into 8Ω RMS
    Music Power Output
     
    130 watts into 8Ω IHF
    150 watts into 4Ω IHF
    Frequency Response 20Hz-50kHz ±1dB
    Harmonic Distortion < 0.5% (at 1kHz rated output)
    Power Bandwidth 15Hz-50kHz (AUX)
    Damping Factor 25 (8Ω, 1kHz)
    Inputs  
    Level/Impedance (for rated output)
     MAGnetic PHONO
     CERamic PHONO
     TAPE HEAD
     TAPE MONITOR
     AUXiliary
    2.4mv / 50kΩ (1kHz)
    51mv / 90kΩ (1kHz)
    1.5mv / 120kΩ (1kHz)
    200mv / 100kΩ (1kHz)
    200mv / 100kΩ (1kHz)
    Outputs  
    Terminals and jacks
     
     
     
     
    Speakers:   4-16Ω
    Stereo headphones jack
    Simultaneous tape recording jacks
     equipped with TAPE MONITOR switch
    Tape recording/playback jack (DIN)
    Equalization Curves PHONO: RIAA, TAPE: NAB

    Semiconductors: 4 ICs, 1 FET, 42 Transistors, 34 Diodes

    Versions/Power requirements
    General Export  /  110/117/130/220/240V AC 50/60Hz with voltage selector

    Power consumption:  285VA, 255 watts max

  • Net weight (2.2 lb = 1 kg)
  • 23 lb (23 lb 0 oz) / 10.442 kg
  • Mentioned in
  • - - Manufacturers Literature (1971 Pioneer Stereo Components catalogue)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Operating and Service manual Pioneer SX-1000TW)
  • Author
  • Model page created by Randall Stuefen. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Stereo Receiver is part of the collections of the following members.

 Forum