• Year
  • 1956 ??
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 86738

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 4
  • Main principle
  • Superheterodyne (common); ZF/IF 465 kHz; 2 AF stage(s)
  • Wave bands
  • Broadcast, Long Wave and more than two Short Wave bands.
  • Power type and voltage
  • Alternating Current supply (AC) / 100; 125; 220; 250 Volt
  • Loudspeaker
  • Permanent or electro-dynamic (moving coil), system not known yet. / Ø 18 cm = 7.1 inch
  • Power out
  • 6 W (unknown quality)
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Seafarer 1112 - Pye Ltd., Radio Works;
  • Shape
  • Tablemodel, low profile (big size).
  • Dimensions (WHD)
  • 560 x 290 x 220 mm / 22 x 11.4 x 8.7 inch
  • Notes
  • SW1: 1,48-4,63 MHz; SW2: 4,5-9,7 MHz; SW3: 9,2-10,1 MHz; SW4: 11,3-12,4 MHz; SW5: 14,6-16,1 MHz; SW6: 16,9-18,7 MHz; SW7: 20,4-22,7 MHz.
    Gerät wurde speziell für das Abhören des Fischerei-Funks vertrieben.

    By this time Ekco is part of Pye so see similar or near identical models all using Metal Rectifier. The older Rimlock versions use a UY41 instead.

    There are probably other similar models with parallel heaters and isolated/earthed chassis.

    There are many Pye models from 1946 to early 1960s with 3 to 9 Bandspread Shortwave.

  • Net weight (2.2 lb = 1 kg)
  • 7.4 kg / 16 lb 4.8 oz (16.3 lb)
  • Source of data
  • -- Original-techn. papers.

 Collections | Museums | Literature

Collections

The model Seafarer is part of the collections of the following members.

 Forum