Rapar Solid State Stereo Amplifier A303

Rapar, Radio Parts Pty. Ltd.; Melbourne

Data
Forum
Pictures
Collections

  • Year
  • 1970 ??
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 314466

 Technical Specifications

  • Number of Transistors
  • 16
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC) / 240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Material
  • Various materials
  • from Radiomuseum.org
  • Model: Rapar Solid State Stereo Amplifier A303 - Rapar, Radio Parts Pty. Ltd.;
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 10.25 x 3.5625 x 7.5 inch / 260 x 90 x 191 mm
  • Notes
    • Power Output: 30W IHF at 8 ohms (15W per Channel).
    • Frequency Res: 30-20,000 cps at 1W ± 2dB.
    • Harmonic Distortion: 1% or less.
    • Hum & Noise: Phono (Mag) 55dB & Tuner/Aux 65dB.
    • Crosstalk: 45dB at 1000Hz.
    • Input Sensitivity: Phono (Mag) 3mV & Tuner/Aux 250mV.
    • Tone Control: Bass ± 8dB at 100 Hz, Treble ± 8 dB at 10KHz.
    • Controls: Power (on/off. Bass, Treble, Volume, Balance.
    • Stereo Headphone Jack on Front Panel.
    • Tape Recorder Output Jack on Rear Panel.
    • Outlets for 4/8/16 ohm impedance speaker.
  • Net weight (2.2 lb = 1 kg)
  • 9 lb 0 oz (9 lb) / 4.086 kg
  • Mentioned in
  • -- Original prospect or advert (Radio Parts Catalogue.)
  • Author
  • Model page created by Martin Kent. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum