Integrated Amplifier Linear A & DD/DC AU-D5

Sansui Electric Co., Ltd.; Tokyo

Data
Forum
Pictures
Collections

  • Year
  • 1981 ?
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 334427

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 120; 100/120/220/240 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 130 W (undistorted)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Integrated Amplifier Linear A & DD/DC AU-D5 - Sansui Electric Co., Ltd.;
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 430 x 148 x 328 mm / 16.9 x 5.8 x 12.9 inch
  • Notes

  • A hi-fi stereo integrated amplifier housed in a metal case with a silver or black front panel with power output  of 2 x 65 watts RMS into 8 ohms.

    Specification  
    Power output
     Min. RMS, both channels driven
     from 20 to 20,000Hz into 8Ω
     with no more than 0.02% THD    		 65 watts per channel
    Total Harmonic Distortion
     at =< rated output    		 < 0.02%
    Intermodulation distortion
     at rated output    		 < 0.02%
    Load impedance 8Ω
    Frequency response (at 1 watt)
     Overall (from AUX)    		 DC to 300,000Hz +0dB,-3.0dB
    RIAA wave deviation
    (PHONO-MM, 20Hz-20kHz)    		 +0.2dB,-0.2dB (REC OUT)
    Damping factor
    (1kHz, both channels driven)    		 200 into 8Ω
    Input sensitivity/impedance (at 1kHz)
     PHONO-MC
     PHONO-MM
     AUX, TUNER, TAPE PLAY-1, 2    		  
    250µV/100Ω
    2.5mV/47kΩ
    200mV/47kΩ
    Output level and impedance (1kHz)
     TAPE REC-1, 2    		 200mV into 47kΩ/600Ω
    Channel separation
     (1kHz, at rated power output)
     PHONO-MM
     AUX, TUNER, TAPE PLAY-1, 2    		  
     
    55dB
    90dB
    Signal to noise ratio
    (short-circuit, A-network)
     PHONO-MC
     PHONO-MM
     AUX, TUNER, TAPE PLAY-1, 2    		  
     
    67dB
    86dB
    110dB

    Versions/Power requirements
    General                /  100/120/220/240V AC 50/60Hz with voltage selector
    USA & Canada    /  120V AC 60Hz
    Europe                 /  220/240V AC 50/60Hz with voltage selector

    Power consumption: 250 watts 300 VA, 350 watts max

  • Net weight (2.2 lb = 1 kg)
  • 9.6 kg / 21 lb 2.3 oz (21.145 lb)
  • Mentioned in
  • - - Manufacturers Literature (Sansui Stereo Sound Guide)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Service manual Sansui AU-D5 AU-D7)
  • Literature/Schematics (2)
  • - - Manufacturers Literature (Operating Instructions Sansui AU-D5)
  • Author
  • Model page created by Howard Craven. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum