3 Band Receiver RP 7160UM

Sanyo Electric Co. Ltd.; Moriguchi (Osaka)

Data
Forum
Pictures
Collections

  • Year
  • 1980 ?
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 284700

 Technical Specifications

  • Number of Transistors
  • 8
  • Main principle
  • Superheterodyne (common); ZF/IF 460/10700 kHz
  • Wave bands
  • Broadcast, Long Wave and FM or UHF.
  • Power type and voltage
  • Line / Batteries (any type) / 120; 220 / AA: 4 x 1,5 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 7.7 cm = 3 inch
  • Power out
  • 0.3 W (0.5 W max.)
  • Material
  • Plastics (no bakelite or catalin)
  • from Radiomuseum.org
  • Model: 3 Band Receiver RP 7160UM - Sanyo Electric Co. Ltd.;
  • Shape
  • Portable set > 8 inch (also usable without mains)
  • Dimensions (WHD)
  • 225 x 123 x 62 mm / 8.9 x 4.8 x 2.4 inch
  • Notes

  • Frequency Range:

    LW 150 - 350 kHz
    MW 510 - 1605 kHz
    FM 87.5 - 108 MHz

    Frontally, on the left, power on/off and volume knob and, below, tone low or high selector switch; on the right, the scale, vertical, with a red tuning indicator diode on the pointer. On the right side is the tuning knob and on the left side the socket for the power cable. On the upper side, band selector and telescopic antenna, external at rest, rotatable only in one plane. On the rear side, earphone jack, mains voltage selector switch and access to the battery compartment.

    Rigid, partially plastic-coated metal handle with full travel.

    Measurements and weight are taken from the service manual.

  • Net weight (2.2 lb = 1 kg)
  • 0.760 kg / 1 lb 10.8 oz (1.674 lb)
  • Author
  • Model page created by Edoardo Sigismondo. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model 3 Band Receiver is part of the collections of the following members.

 Forum