Compact Disc Cassette Deck TXD-R11

Sony Corporation; Tokyo

Data
Forum
Pictures
Collections

  • Year
  • 1995 ?
  • Category
  • Sound/Video Recorder and/or Player
  • Radiomuseum.org ID
  • 316961

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Details
  • Other Combination - see Notes
  • Power type and voltage
  • Alternating Current supply (AC) / 120; 220-230 Volt
  • Loudspeaker
  • - For headphones or amp.
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Compact Disc Cassette Deck TXD-R11 - Sony Corporation; Tokyo
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 430 x 125 x 280 mm / 16.9 x 4.9 x 11 inch
  • Notes

  • A stereo hi-fi Compact Disc Player / Cassette Tape deck. RCA phono sockets for Tape Input, Tape Output and CD Output and a jack for stereo phones with volume control.

    Specification  
    Compact Disc Section  
    System Compact disc digital audio system
    Laser (KSS-240A) Semiconductor laser
    Wavelength 780 — 790 nm
    Frequency response 2 Hz — 20 kHz (± 0.5 dB)
    Signal-to-noise ratio More than 100 dB
    Dynamic range  More than 95 dB
    Harmonic distortion Less than 0.007%
    Channel separation More than 95 dB
    Cassette Tape Section  
    Recording system 4-track 2-channel stereo
    Bias AC bias
    Head (x 1) Erasing F & F
    Playback/Recording SD
    Motors Capstan motor x 1 (DC servo motor)
    Reel motor x 1 (DC motor)
    Wow and flutter ±0.14% W. Peak (IEC)
     0.08% W. RMS (NAB)
    ±0.19% W. Peak (DIN)
    Fast-winding time (approx.) 90 sec. (with Sony C-60 cassette)
    Frequency response
    (Dolby NR off)    		 Type I tape, Sony Type I (NORMAL): 30Hz-15kHz (±3dB)
    Type II tape, Sony Type II (HIGH): 30Hz-17kHz (±3dB)
    Type IV tape, Sony Type IV (METAL): 30Hz-18kHz (±3dB)
    Signal-to-noise ratio
    (at peak level, weighted,
    and with Dolby NR off)    		 Type I tape, Sony Type I (NORMAL): 53 dB
    Type II tape, Sony Type II (HIGH): 57 dB
    Type IV tape, Sony Type IV (METAL): 57 dB
    S/N ratio improvement
    Dolby NR on    
    Approximate values    		 Dolby B: 5 dB at 1 kHz, 10 dB at 5 kHz
    Dolby C: 15 dB at 500 Hz, 20 dB at 1 kHz
    Harmonic distortion  
    Type 1 tape, Sony Type I
    Type IV tape, Sony Type IV    		 (NORMAL): 0.4% (160 nWb/m 315 Hz, 3rd H.D.)
    (METAL): 1.8% (250 nWb/m 315 Hz, 3rd H.D.)
    Inputs  
    TAPE IN
    Phono jacks    		  
    Max. input sensitivity 0.16 V (input impedance: 47 kΩ)
    Outputs  
    TAPE OUT (FIXED)
    Phono jacks    		 Max. output level: 0.5 V (at a load impedance of 47 kΩ)
    Load impedance: Over 10 kΩ
    CD OUT (FIXED)
    Phono jacks    		 Max. output level: 2 V (at a load impedance of 50 kΩ)
    Load impedance: Over 10 kΩ
    PHONES (VARIABLE)  
    Stereo phone jack    		 Max. output level: 0 - 3 mW (at a load impedance of 32 Ω)

    Versions/Power requirements
    Canadian model /  120V AC 60Hz
    AEP model /  220-230V AC 50/60Hz

    Power consumption:   23 W

  • Net weight (2.2 lb = 1 kg)
  • 4.5 kg / 9 lb 14.6 oz (9.912 lb)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Service manual TXD-R11 dated 1995.6)
  • Author
  • Model page created by Howard Craven. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum