Integrated Amplifier 1140 TA-1140
Sony Corporation; Tokyo
- Country
- Japan
- Manufacturer / Brand
- Sony Corporation; Tokyo
- Year
- 1971–1974
- Category
- Audio Amplifier or -mixer
- Radiomuseum.org ID
- 157849
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Transistors
- 41
- Semiconductors
- Main principle
- Audio-Amplification
- Wave bands
- - without
- Details
- Hi-Fi equipment
- Power type and voltage
- Alternating Current supply (AC) / 100; 120; 220; 240 Volt
- Loudspeaker
- - This model requires external speaker(s).
- Power out
- 80 W (100 W max.)
- Material
- Metal case
- from Radiomuseum.org
- Model: Integrated Amplifier 1140 TA-1140 - Sony Corporation; Tokyo
- Shape
- Book-shelf unit.
- Dimensions (WHD)
- 400 x 149 x 316 mm / 15.7 x 5.9 x 12.4 inch
- Notes
-
A solid state hi-fi stereo integrated amplifier housed in a metal case with power output of 40 watts RMS per channel into 8 ohms or 50 watts RMS per channel into 4 ohms. With rotary bass and treble tone controls, push button switches for speakers (main and remote), mode (reverse, stereo, L + R), filters low and high, switches for bass turn-over (500Hz, 250Hz), treble turn over (2.5kHz, 5kHz), loudness, tape monitor (tape1, source, tape2). RCA phono sockets for input Phono1, Phono2, Tuner and Aux1, for input/output Tape1 and Tape2, for pre-amplifier output and power amplifier input, and for centre channel output, DIN socket for Tape1 Rec/Pb, terminals for 2 pairs of loudspeakers and jacks for headphones and Aux2.
Specifications Power Amplifier Section RMS power per channel
both channels driven40 watts into 8Ω
50 watts into 4ΩDynamic power
both channels driven120 watts into 8Ω
190 watts into 4ΩPower bandwidth 6Hz - 35kHz, IHF Harmonic distortion (20Hz-20kHz) < 0.1% at rated output IM distortion < 0.1% at rated output Input impedance 100kΩ Input sensitivity (for rated output) 0.85V Signal/Noise ratio > 110dB (shorted input) Preamplifier Section Frequency response PHONO1,2 RIAA curve ± 0.5dB TUNER,AUX1,2,TAPE1,2,
REC/PB (input)15Hz - 80kHz ±2dB Input sensitivity/impedance PHONO1,2 1.2mV/47kΩ TUNER,AUX1,2,TAPE1,2
REC/PB (input)130mV/100kΩ Signal output/impedance REC OUT: 130mV/10kΩ PRE OUT: 1V/3kΩ
REC/PB (output): 30mV/80kΩSignal/Noise ratio PHONO1,2 > 70dB (weighting network "B") TUNER, AUX1,2,TAPE1,2,REC/PB > 90dB (weighting network "A") Filters LOW: 6dB/oct, below 70Hz
HIGH: 6dB/oct, above 5kHzVersions/Power requirements
GEP, NEP / 100, 120, 220, 240V AC 50/60Hz with voltage selectorPower consumption: 200 watts
Vollverstärker, dynamische Ausgangsleistung : (IHF) 120W/8 Ohm; 190W/4 Ohm
Sinusleistung: 2 x 40W/8 Ohm Sinusleistung Din: 2 x 50W/4 Ohm
Beide Kanäle gleichzeitig betrieben: 2 x 35 Watt /8 Ohm
Klirrfaktor: Vollaussteuerung : <0,1%
Eingänge: Phono; Tuner; Reserve; Band.Preis in Deutschland: 1.111,00 DM
- Net weight (2.2 lb = 1 kg)
- 9.8 kg / 21 lb 9.4 oz (21.586 lb)
- Price in first year of sale
- 59,800.00 JPY
- Mentioned in
- -- Original prospect or advert (1973-74 Sony Programm Ubersicht catalogue)
- Literature/Schematics (1)
- Selezione Radio-TV Dezember 1972
- Literature/Schematics (2)
- - - Manufacturers Literature (Service manual Sony TA-1140 dated 1971)
- Author
- Model page created by Eduard Abfalterer. See "Data change" for further contributors.
- Other Models
-
Here you find 3995 models, 3856 with images and 958 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Sony Corporation; Tokyo
Collections
The model Integrated Amplifier 1140 is part of the collections of the following members.