TFM-1500L
Sony Corporation; Tokyo
- Country
- Japan
- Manufacturer / Brand
- Sony Corporation; Tokyo
- Year
- 1968 ?
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 148067
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Transistors
- 14
- Semiconductors
- 2SA456 2SA456 2SA456 2SC403 2SC403 2SC403 2SC403 2SB379 2SC403 2SC633 2SC633 2SC633 2SB383 2SB383 1T26 1T23
- Main principle
- Superheterodyne (common); ZF/IF 455/10700 kHz; 3 AF stage(s)
- Wave bands
- Broadcast, Long Wave, Short Wave plus FM or UHF.
- Power type and voltage
- Dry Batteries / 4 x 1.5 Volt
- Loudspeaker
- Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) - elliptical
- Power out
- 1.5 W (unknown quality)
- Material
- Plastics (no bakelite or catalin)
- from Radiomuseum.org
- Model: TFM-1500L - Sony Corporation; Tokyo
- Shape
- Portable set > 8 inch (also usable without mains)
- Dimensions (WHD)
- 260 x 180 x 100 mm / 10.2 x 7.1 x 3.9 inch
- Notes
- Almost identical to the TFM-1000L (see there). About the picture: in this radio the handle and some original knobs are missing.
- Net weight (2.2 lb = 1 kg)
- 2.2 kg / 4 lb 13.5 oz (4.846 lb)
- Literature/Schematics (1)
- Antique Radio Magazine n.76, January-February 2007, page 17. Written in Italian
- Author
- Model page created by Aldo Andreani. See "Data change" for further contributors.
- Other Models
-
Here you find 4017 models, 3873 with images and 965 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Sony Corporation; Tokyo
Collections
The model is part of the collections of the following members.
Forum contributions about this model: Sony Corporation;: TFM-1500L
Threads: 1 | Posts: 1
Es ist hier eher schon davon die Rede gewesen: was macht man bei fehlendem Henkel?
Im vorliegenden Fall nun musste ich zum Henkelbau übergehen. Das rechte Radio hatte seinen Henkel noch, nur die Zierblende links war abgefallen; sie wurde durch einen Eigenbau ersetzt.
Das linke Gerät kam henkellos; aber die beiden vertikalen Trägerteile waren noch da. Die Zierblenden fehlten natürlich beide, dazu aber war das lange obere Tragestück abgerissen worden und verschwunden.
Welchen Grundstoff nun verwenden? – Es ist eine zersägt Kunststoff-Spaghettizange geworden, und danach wurde das ganze verziert mit neuen Blenden.
Wer näher hinschaut, sieht den Betrug natürlich. Aber was sagt man auf den ersten Blick? Ganz passabel, nicht wahr?
Attachments
- Welcher Henkel ist der echte? (125 KB)
Bruce Cohen, 31.Aug.17