Sparton 69 Equasonne Cabinet Set

Sparks-Withington Co., (Sparton); Jackson, Michigan

Data
Forum
Pictures
Collections

  • Year
  • 1928/1929
perfect model
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 226693

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Tubes
  • 8
  • Main principle
  • TRF without regeneration
  • Tuned circuits
  • 4 AM circuit(s)
  • Wave bands
  • Broadcast only (MW).
  • Power type and voltage
  • Alternating Current supply (AC) / 3 taps, 100 to 110, 110 to 120 and 120 to 130 Volt
  • Loudspeaker
  • - This model requires external speaker(s).
  • Material
  • Wooden case
  • from Radiomuseum.org
  • Model: Sparton 69 Equasonne Cabinet Set - Sparks-Withington Co., Sparton
  • Shape
  • Console, Highboy (legs > 50 %).
  • Notes

  • Combination of model 69 plus a table like high boy console.
    The Sparton 69 and 69-A Equasonne models have one dial (primary tuning control knob). These models share the same schematic: 69, 79-A and 89 without naming the tubes and we think that 69-A is existing too because it is named below (in Radio Retailing). The list "Quantity and Types of tubes" from Sparks-Withington name for the 69: 6 x 485 Sparton, 50 and 80. See also the Sparton 69 in combination with speaker 29 and the model 69.
    The models 39, 69, 79-A, 89, 89-A, 99, 109 and 930 are the first "Equasonne" models. The tubes are the original line up, not replacement, according to the page "The quantity and types of tubes used in Sparton receiving sets" and of Rider's page Sparton 5-6, replacement for the C-485, C-484 or 484 would be the 485_Sparton. See also the article here about different radio seasons.

    In "Radio Retailing" May 1933, page 47, "Tricks of the Trade" we can read for models Sparton 69-A, 79-A, 930AC, 931AC, 931DC, 301DC and 301AC: "Fourth section of band-pass selector, just preceding RF sometimes cannot be tuned to resonance with first three sections, producing weak reception and loss in selectivity. Give first, second and third selector trimmers 3 turns clockwise. This makes slightly less tuning capacity necessary for given frequency and fourth section selector can not be adjusted for resonance. Balance set in customary manner with oscillator and output meter and re-adjust kilocycle scale on dial by loosening it on shaft and re-setting."
     

  • Price in first year of sale
  • 147.00 $
  • External source of data
  • Ernst Erb
  • Author
  • Model page created by Ernst Erb. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum