Connoisseur Three Speed

This new motor unit is another noteworthy achievement in the "Connoisseur" tradition.

Full 12" turntable 33⅓, 45, and 78 rpm. The synchronous motor is virtually vibrationless and suitable for standard, transcription, and microgroove recordings.

The 12” platter is lathe-turned and manufactured of non-ferrous material.

Main turntable spindle, precision ground and lapped, runs in phosphor-bronze bearings: low noise level and hum induction.

The speed change is arranged mechanically and gives a 2% variation on all speeds, the synchronous motor running at constant speed at all settings. No braking action is employed to obtain speed change.

Mounted on a ¼" die-cast board with a 3¾” clearance distance below the motor board. The speed selector turret is fitted to the left rear on the motor board. The on-off switch at the left, also releases pressure on the rubber drive assembly.
All motor boards are drilled to take Connoisseur Standard and Super Lightweight pickups.

Input voltages: 200-250 A.C. 50 cycles or 60 cycles to order at no extra charge.

Price without pick-up £16.10.0 plus £7.3.0 P. Tax

Here you find 8 models, 5 with images and 0 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Sugden & Co. Ltd., A.R.; Brighouse, Yorkshire