Probe Power Supply 1101
Tektronix; Portland, OR
- Country
- United States of America (USA)
- Manufacturer / Brand
- Tektronix; Portland, OR
- Year
- 1969 ?
- Category
- Power supply/conditioner or battery or charger
- Radiomuseum.org ID
- 270127
Probe Power Supply 1101 total view
Probe Power Supply 1101 front view
Probe Power Supply 1101 rear view
Probe Power Supply 1101 open
- Number of Transistors
- Semiconductors present.
- Semiconductors
- Power type and voltage
- Alternating Current supply (AC) / 115/230 Volt
- Material
- Metal case
- from Radiomuseum.org
- Model: Probe Power Supply 1101 - Tektronix; Portland, OR
- Shape
- Tablemodel, with any shape - general.
- Dimensions (WHD)
- 5.25 x 3.125 x 8.25 inch / 133 x 79 x 210 mm
- Notes
-
With introduction of Active FET Probes like P6201 or P6202, an extra power supply has become necessary. With this model 1101, active probes can be used even with scope models that do not supply probe power internally.
Primary Power: 90 to 136 VAC or 180 to 272 VAC (with selector switch), max. 47 VA
Secondary Power: +15 V / -15 V / +5 V at 400 mA each, short-circuit protected
Ripple Content: 1mV or less, each supply with a 400 mA loadFour special LEMO four-pin connectors, connected in parallel, provide the output facility.
Note: The replacement model 1101A can supply only two probes at 300 mA each !
- Net weight (2.2 lb = 1 kg)
- 3.5 lb (3 lb 8 oz) / 1.589 kg
- Price in first year of sale
- 225.00 USD
- Mentioned in
- - - Manufacturers Literature
- Author
- Model page created by Franz Harder. See "Data change" for further contributors.
- Other Models
-
Here you find 386 models, 374 with images and 92 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Tektronix; Portland, OR
Collections
The model Probe Power Supply is part of the collections of the following members.