Kenwood Solid State AM-FM Stereo Tuner KT-5000

Kenwood, Trio-Kenwood Inc.; Komagane

Data
Forum
Pictures
Collections

  • Year
  • 1970/1971
  • Category
  • Broadcast Receiver - or past WW2 Tuner
  • Radiomuseum.org ID
  • 326054
    • alternative name: Trio Corp.
    • Brand: Jennen

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Superheterodyne (common)
  • Wave bands
  • Broadcast (BC) and FM or UHF.
  • Details
  • Hi-Fi equipment
  • Power type and voltage
  • Alternating Current supply (AC) / 110-120; 220-240 Volt
  • Loudspeaker
  • - For headphones or amp.
  • Material
  • Various materials
  • from Radiomuseum.org
  • Model: Kenwood Solid State AM-FM Stereo Tuner KT-5000 - Kenwood, Trio-Kenwood Inc.;
  • Shape
  • Book-shelf unit.
  • Dimensions (WHD)
  • 16.3125 x 5.15625 x 11.03125 inch / 414 x 131 x 280 mm
  • Notes

  • A hi-fi AM/FM stereo tuner with an analogue dial housed in a metal case with wooden side panels. With meters for Signal and FM Tuning, Stereo, FM Muting and MPX Filter   indicators, rotary Tuning and Output Level controls, rotary Selector switch (Power Off, FM Auto, FM Mono, AM),  On/Off switches for FM Muting and MPX Filter. On the rear, an adjustable ferrite stick AM antenna, terminals for FM and AM antenna and Ground, RCA phono sockets for Line Output, Output to Tape recorder, Mono Output and FM Multipath Output.

    SPECIFICATION  
    FM SECTION  
    USABLE SENSITIVITY (IHF) 1.7µV
    FREQUENCY RESPONSE 20Hz to 15,000Hz +0dB,-2dB
    HARMONIC DISTORTION
    (at 400Hz, 100% Mod.)    		 Mono:  Less than 0.6%
    Stereo: Less than 0.9%
    S/N RATIO (at 100% Mod.) Better than 60dB
    CAPTURE RATIO (IHF) 2.5dB
    IMAGE REJECTION (at 100MHz) Better than 90dB
    IF REJECTION Better than 85dB
    ALT. CHANNEL SELECTIVITY Better than 50dB
    STEREO SEPARATION Better than 35dB at 1,000Hz
    OUTPUT VOLTAGE (at 400Hz, 100% Mod.) 1.0 Volt ±1dB
    ANTENNA INPUT IMPEDANCE 300Ω Balanced, 75Ω Unbalanced
    OUTPUT IMPEDANCE 200Ω
    STEREO NOISE FILTER Yes (High Frequency Blend circuit)
    INTER STATION MUTING Yes
    TUNING METER Yes (Center Tuning Type)
    SIGNAL STRENGTH METER Yes
    MECHANICAL IF FILTER Yes
    AM SECTION  
    USABLE SENSITIVITY (IHF} 15µV
    SELECTIVITY Better than 25dB
    IMAGE REJECTION Better than 90dB at 1,000kHz
    OUTPUT VOLTAGE (at 400Hz, 30% Mod.) 0.33V ±1dB

    Voltage requirements
    110-120V, 220-240V AC 50/60Hz with voltage selector

    Power Consumption: 15 Watts

    Same as the Trio KT-5000 Solid State AM-FM Stereo Tuner.

  • Net weight (2.2 lb = 1 kg)
  • 14 lb 0 oz (14 lb) / 6.356 kg
  • Mentioned in
  • -- Original prospect or advert (1971 Kenwood Stereo Amplifier & Tuner catalogue)
  • Literature/Schematics (1)
  • - - Manufacturers Literature (Instruction manual KT-5000 dated 1970)
  • Author
  • Model page created by Howard Craven. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Kenwood Solid State AM-FM Stereo Tuner is part of the collections of the following members.

 Forum