Radiovox AA
United Distributors Ltd. (Udisco); Sydney, NSW
- Country
- Australia
- Manufacturer / Brand
- United Distributors Ltd. (Udisco); Sydney, NSW
- Year
- 1924
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 330737
- Number of Tubes
- 4
- Valves / Tubes
- Main principle
- TRF (Tuned-Radio-Frequency but use of regeneration unknown)
- Wave bands
- Broadcast only (MW).
- Power type and voltage
- Batteries / addl. power jack
- Loudspeaker
- -Loudspeaker incorporated, but system not known.
- Material
- Wooden case
- from Radiomuseum.org
- Model: Radiovox AA - United Distributors Ltd.
- Shape
- Console, Lowboy (legs < 50 %).
- Notes
-
MODEL AA, Four Valves, one stage of Radio Frequency, Detector, and two stages of Amplification. Loudspeaker built into set, with an air chamber specially made of resonant wood under a patent construction which enables sound waves to traverse the entire length of the Cabinet, giving the fullest possible length for tonal amplification.
The Triad, October 10, 1924, Page 29.
- Price in first year of sale
- 87.50 AUS £
- Mentioned in
- The Triad, October 10, 1924, Page 29.
- Author
- Model page created by Gary Cowans. See "Data change" for further contributors.
- Other Models
-
Here you find 41 models, 37 with images and 1 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from United Distributors Ltd. (Udisco); Sydney, NSW
Forum contributions about this model: United Distributors: Radiovox AA
Threads: 1 | Posts: 1
No. 14288/23: APPLICANT (ACTUAL INVENTOR), L. D. RUDOLPH, SYDNEY, N.S.W.
For improvements in cabinets for wireless receiving sets such as are employed for the reception of broadcast programmes. Fig. 2 is a perspective view of the improved cabinet, one object of which is the arrangement whereby the amplifying apparatus occupies a minimum space, whilst a maximum sound amplification is produced.
Another object is to provide a cabinet wherein the closing of the hinged lid puts the apparatus out of service for reception by operating a switch to break the filament current supply to the thermionic valves. The cabinet (5) of veneer wood is constructed with an open end (6) and a hinged cover (8). The body of the cabinet is divided by a shelf (9) into two compartments (10 and 11), the lower having a hinged swinging door (12).
The upper compartment is provided with a front panel of ebonite, upon which is mounted the control handles if the wireless apparatus. When the cabinet is not in use the control panel may be concealed by the hinged flap (18).
The lower compartment is designed to accommodate the low-tension battery (21) and the high-tension battery (22) of the amplifier and may be enclosed by means of the door (12). In the same compartment a sound amplifier (24) is mounted and associated with a wooden horn (25), which extends upwards to be flush with the top of the cabinet: A detachable cover (27) provided with fine wire gauze is fitted to the upper part of the cabinet, whilst the lid is hinged with a toothed link by means of which the volume of sound from the reproducer may be varied by adjusting the lid opening to various angles. Sockets are provided for connecting the aerial and earth wires to the apparatus.
Radio in Australia & NZ, February 4, 1925, page 732 & 733
Gary Cowans, 08.Jul.21