Underground Metal Detector

Unknown - CUSTOM BUILT: China

  • Year
  • 2000 ??
  • Category
  • Miscellaneous (Other, Various) - see notes
  • Radiomuseum.org ID
  • 304347

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Transceiver
  • Wave bands
  • Wave Bands given in the notes.
  • Power type and voltage
  • Storage and/or dry batteries / 18 Volt
  • Loudspeaker
  • Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil)
  • Material
  • Plastics (no bakelite or catalin)
  • from Radiomuseum.org
  • Model: Underground Metal Detector - Unknown - CUSTOM BUILT: China
  • Shape
  • Miscellaneous shapes - described under notes.
  • Dimensions (WHD)
  • 140 x 100 x 150 mm / 5.5 x 3.9 x 5.9 inch
  • Notes
  • Very Low Frequency (VLF) Pulse Induction (PI) Transmit/Receiver type; All Metal and Discriminator operation mode; the Receiver and the Transmit antenna coil are enclosed in a plastic 6.5 inches diameter waterproof probe plate at end of an aluminium stretch (variable lenght from 30.7 up to 42.1 inches); sensitivity 13 cm for an US 25 Cent coin; working frequency about 5 kHz; standby current 10 mA, maximum current 70 mA.

  • Net weight (2.2 lb = 1 kg)
  • 1.124 kg / 2 lb 7.6 oz (2.476 lb)
  • Mentioned in
  • -- Original prospect or advert
  • Author
  • Model page created by Emilio Focosi. See "Data change" for further contributors.

 Collections | Museums | Literature

Collections

The model Underground Metal Detector is part of the collections of the following members.

 Forum