Weconette 363
Weco N.V. Radiofabriek; Amsterdam
- Country
- Netherlands
- Manufacturer / Brand
- Weco N.V. Radiofabriek; Amsterdam
- Year
- 1936
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 313774
The radio belongs to the VRT Omroepmuseum
The radio belongs to the VRT Omroepmuseum
The radio belongs to the VRT Omroepmuseum
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 3
- Main principle
- Superhet, IF regeneration
- Tuned circuits
- 4 AM circuit(s)
- Wave bands
- Broadcast (MW) and Long Wave.
- Power type and voltage
- AC/DC-set / 110 Volt
- Loudspeaker
- Magnetic loudspeaker (reed) generic.
- Material
- Wooden case
- from Radiomuseum.org
- Model: Weconette 363 - Weco N.V. Radiofabriek;
- Shape
- Tablemodel without push buttons, Mantel/Midget/Compact up to 14
- Dimensions (WHD)
- 305 x 200 x 160 mm / 12 x 7.9 x 6.3 inch
- Notes
-
The radio was made for the Belgian market, all indications on the rear panel are French/Dutch. Most capacitors are Belgian made.
By inserting a ballast resistor the device can also be operated at 130 and 220 V.
Made by Fonior Brussels.
- Literature/Schematics (1)
- -- Schematic
- Author
- Model page created by Georges Van Campenhout † 28.4.22. See "Data change" for further contributors.
- Other Models
-
Here you find 48 models, 39 with images and 9 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Weco N.V. Radiofabriek; Amsterdam
Forum contributions about this model: Weco N.V.: Weconette 363
Threads: 2 | Posts: 9
Good afternoon,
I recently uploaded the self-drawn circuit diagram of this radio.
I am wondering how this set can operate with only one IF filter? What is the purpose of L9 in series with Ct3?
I think that this cheap radio was esigned to receive only the local transmitters?
Attachments
- Weconette 363 _ IF Filter (95 KB)
Georges Van Campenhout † 28.4.22, 31.Jul.21
Sehr geehrte Forummitglieder,
Wer kann mir helfen, den Typ der dritten fehlenden Röhre zu finden? Es ist eine 7-polige UX7-Basis, der Heizstrom beträgt 300 mA, und der g1 ist an der Oberseite angeschlossen. Die Kathode ist Pin 5, die Anode ist Pin 2, die Heizung ist Pin 1 und 7.
Vielen Dank
Attachments
- Missing tube (112 KB)
Georges Van Campenhout † 28.4.22, 03.Nov.19