Stereo Power Amplifier A4.4

Yorkville Sound; Pickering, ON

  • Year
  • 2001 ?
  • Category
  • Audio Amplifier or -mixer
  • Radiomuseum.org ID
  • 274525

Click on the schematic thumbnail to request the schematic as a free document.

 Technical Specifications

  • Number of Transistors
  • Semiconductors present.
  • Semiconductors
  • Main principle
  • Audio-Amplification
  • Wave bands
  • - without
  • Power type and voltage
  • Alternating Current supply (AC)
  • Loudspeaker
  • - This model requires external speaker(s).
  • Power out
  • 2400 W (4350 W max.)
  • Material
  • Metal case
  • from Radiomuseum.org
  • Model: Stereo Power Amplifier A4.4 - Yorkville Sound; Pickering, ON
  • Shape
  • Rack
  • Dimensions (WHD)
  • 482 x 89 x 452 mm / 19 x 3.5 x 17.8 inch
  • Notes
  • Yorkville Stereo Power Amplifier Model A4.4
    Power output:

    • 2Ω: not applicable.
    • 4Ω: 2 x 1200 W continuous, 2 x 2175 W burst, bridged mode not possible.
    • 8Ω: 2 x 750 W continuous, 2 x 1200 W burst,  1 x 2400W bridged continuous,  1 x 4350 W bridge burst. 

    Frequency response: 20Hz to 20kHz ± 1 dB
    Total harmonic distortion: 0.1%
    Damping factor @ 8Ω: 600
    Gain: 41 dB
    Input sensitivity: 1.4V for full power
    Signal to noise ratio: 103dB
    High Pass Filter
    Power Consumpton: up to max. 3000 Watts
    Finish: Baked, Black Painted

  • Net weight (2.2 lb = 1 kg)
  • 11.4 kg / 25 lb 1.8 oz (25.11 lb)
  • Mentioned in
  • - - Manufacturers Literature (Owner's Manual)
  • Author
  • Model page created by Franz Scharner. See "Data change" for further contributors.

 Collections | Museums | Literature

 Forum