5S218AT 5-S-218AT Ch=5521AT
Zenith Radio Corp.; Chicago, IL
- Country
- United States of America (USA)
- Manufacturer / Brand
- Zenith Radio Corp.; Chicago, IL
- Year
- 1937
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 67648
-
- alternative name: Chicago Radio Lab
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 5
- Main principle
- ZF/IF 456 kHz
- Wave bands
- Broadcast and Short Wave (SW).
- Power type and voltage
- Alternating Current supply (AC) / 115 Volt
- Loudspeaker
- Electro Magnetic Dynamic LS (moving-coil with field excitation coil)
- from Radiomuseum.org
- Model: 5S218AT 5-S-218AT Ch=5521AT - Zenith Radio Corp.; Chicago,
- Shape
- Tablemodel, with any shape - general.
- Dimensions (WHD)
- 10.4 x 12 x 9 inch / 264 x 305 x 229 mm
- Notes
- cube shaped w.feet;
- External source of data
- Ernst Erb
- Circuit diagram reference
- Rider's Perpetual, Volume 9 = 1938 and before
- Mentioned in
- Zenith Radio The Glory Years 1936-1945
- Other Models
-
Here you find 4496 models, 4101 with images and 3615 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Zenith Radio Corp.; Chicago, IL
Forum contributions about this model: Zenith Radio Corp.;: 5S218AT 5-S-218AT Ch=5521AT
Threads: 1 | Posts: 3
This model radio employs a three section "candohm" resistor (R10) working as a voltage divider to obtain the negative bias voltages for the 6Q7G and 6F6G tube grids.
The schematics does not gives the ohm values for this "candohm".
I've search over to get these.. but has no success.
I wonder if maybe someone could give a clue with this matter.
attached is a schematics with all the voltages.
Cheers,
Meyer
Attachments
- Zenith Chassis 5521 (123 KB)
Meyer Rochwerger, 23.Aug.09