8S359 Ch= 5807
Zenith Radio Corp.; Chicago, IL
- Country
- United States of America (USA)
- Manufacturer / Brand
- Zenith Radio Corp.; Chicago, IL
- Year
- 1939
- Category
- Broadcast Receiver - or past WW2 Tuner
- Radiomuseum.org ID
- 68099
-
- alternative name: Chicago Radio Lab
Click on the schematic thumbnail to request the schematic as a free document.
- Number of Tubes
- 8
- Main principle
- Superheterodyne (common); ZF/IF 455 kHz
- Tuned circuits
- 6 AM circuit(s)
- Wave bands
- Broadcast plus 2 Short Wave bands.
- Power type and voltage
- Alternating Current supply (AC) / 114 Volt
- Loudspeaker
- Electro Magnetic Dynamic LS (moving-coil with field excitation coil) / Ø 12 inch = 30.5 cm
- Material
- Wooden case
- from Radiomuseum.org
- Model: 8S359 Ch= 5807 - Zenith Radio Corp.; Chicago,
- Shape
- Console with any shape - in general
- Notes
-
The Zenith model 8S359 equipped with chassis 5807 is an 8-tube AC operated BC/2x SW band console radio receiver. Push-button tuning.
BC: 550 to 1700 kc
SW 1: 2.3 to 7.4 Mc
SW 2: 7.8 to 24.5 Mc
- External source of data
- Ernst Erb
- Source of data
- The Radio Collector's Directory and Price Guide 1921 - 1965
- Circuit diagram reference
- Rider's Perpetual, Volume 10 = 1939 and before
- Literature/Schematics (1)
- Zenith Radio The Glory Years 1936-1945
- Other Models
-
Here you find 4496 models, 4101 with images and 3615 with schematics for wireless sets etc. In French: TSF for Télégraphie sans fil.
All listed radios etc. from Zenith Radio Corp.; Chicago, IL
Collections
The model 8S359 is part of the collections of the following members.
Forum contributions about this model: Zenith Radio Corp.;: 8S359 Ch= 5807
Threads: 1 | Posts: 3
I am in need of a photo(s) showing the band selector switch and lever, with as much detail as possible of the linkage between the switch and the lever. The switch is located on the right side of the chassis (inside the cabinet), however the lever is located on the volume/tuner shaft located in the middle lower part of the chassis. On my radio, the lever and the linkage to the switch are missing.
Attachments
- Zenith 8-S-359 chassis (238 KB)
Larry Richardson, 02.Jul.14